Kaaz'min Robot Build Diary

[Kaazmin]

thanks a lot, I have tried switching and swapping over the motor it's on and the channel on the receiver and I still get the same problem. the battery is fully charged. it might be due to the calibration of the ESC. plus I have removed the casing from the receiver and covered it in masking tape to save weight ^-^. I'll have a proper look at the calibration stuff to see but yeah IDK what it is at the moment but it's definitely a problem with the ESC

[AntRoboteer]

I notice you had screw terminals in one of your photos. Maybe the power wires are not in fully. Perhaps try to restrip the wires and put them back in, maybe soldering together with others if possible.

[Kaazmin]

AHA I re calibrated the ESC and its working perfectly thanks for the advice

[AntRoboteer]

Yes! That's awesome to hear. Best of luck with the rest of the build.

[Kaazmin]

for some reason on a full charge, my battery is only lasting about 1 minute ... https://hobbyking.com/en_us/turnigy-nan ... -pack.html this is the one I use at the moment, anyone got any ideas ??

[Kaazmin]

Sorry for the absence of updates guys I recently stated uni ^-^ but I am glad to say that Error.EXE 2 is finally finished the new disk came a week ago and the bot is now working perfectly all ready for AWS 53

(the disk specs are 25grams 2mm stainless steel 6cm in diameter)











Also Heres a picture of the new robot next to the old chassis ^-^ it's a bit of an upgrade since the last one XD

[AntRoboteer]

Awesome, I look forward to seeing it soon!

[Shakey]

Now that's a mean spinner mechanism!

[GeorgeR]

That's looking pretty dangerous, it'll be good to see what it can do it at the aws.

[botomatic1000]

The new .EXE looks brilliant, awesome job