AntWeight Parts Online & Offline

Simon Windisch · Post by **Simon Windisch** » Tue Jan 17, 2006 12:20 pm

Simon Windisch wrote: I'm buying three LiPos from http://www.robotmarketplace.com/marketp ... ly-ko.html and they should be ?29.11 including postage.

Well they ended up costing ?31.90 for three LiPos with leads. They took seven days to arrive from america.

SImon

EpicentrE · Post by **EpicentrE** » Thu Mar 16, 2006 2:39 pm

Hi,

I'm looking for a UK supplier of 1mm sheets of 7075 Aluminium - the sheet I used before I got from Sozbots, but they're not trading anymore. Anyone got any other sources?

Thanks in advance.

olivers · Post by **olivers** » Thu Mar 16, 2006 11:11 pm

Try http://www.robotcombat.com/

I want to get some stuff from there including the carbon fibre sampler pack.

Remote-Controlled Dave · Fri Mar 17, 2006 12:37 am

On a similar note, sheets of 1mm polycarb that aint steeped in postage costs. Wheres the best to get from?

olivers · Post by **olivers** » Fri Mar 17, 2006 12:39 am

probably cheaper from robotcombat with postage than from Technobots. Someone mentioned RS a while ago but you have to buy loads.

Cavecrusher · Post by **Cavecrusher** » Tue Mar 21, 2006 2:57 pm

http://cgi.ebay.nl/443-Rpm-Mini-Geared- ... dZViewItem

Flippt · Post by **Flippt** » Tue Mar 21, 2006 8:58 pm

Do they take more then 4,5V? If they do I might actually order some.

Cavecrusher · Post by **Cavecrusher** » Tue Mar 21, 2006 10:02 pm

i use them on 11,1v, so yes...

Rhys · Post by **Rhys** » Tue Mar 21, 2006 10:12 pm

Good good! Just ordered 4 and a sozbots board

Wouldn't they be a bit too quick at 11.1v though? It says they're 443rpm at 3v, so wouldn't that make them over 1500rpm? I can't make much use of anything over 700rpm. Maybe I should get more practise...

josh · Post by **josh** » Wed Mar 22, 2006 8:03 am

ive bough from that seller before hes a gd seller but im gunna stick with sanyos coz i dunno whether they ae sanyos or jst copies

http://cgi.ebay.co.uk/221-Rpm-Mini-Gear ... dZViewItem could go for these coz at 6v u would get a reasonable speed and not 1300rpm or wateva it was