fleas
Moderators: BeligerAnt, petec, administrator
- earthwormjim
- Posts: 1190
- Joined: Thu Sep 16, 2010 4:57 pm
- Location: Secret Undisclosed Moonbase Location
Re: fleas
Oui,oui.
Monsieur,wiv zeez reubots,yoo aire reeeely spoileeeng urs!
(Sorry!)
Monsieur,wiv zeez reubots,yoo aire reeeely spoileeeng urs!
(Sorry!)
Re: fleas
A mere 2 years after all the parts arrived, I've finally finished Cyklos...
All in at 73.0g, so might even get some armour on it. Slight problem though, I don't know how to turn the brake off the ESC, so every time I throttle down quickly, this happens....
http://youtu.be/1LblNiwICiU
Oops...
All in at 73.0g, so might even get some armour on it. Slight problem though, I don't know how to turn the brake off the ESC, so every time I throttle down quickly, this happens....
http://youtu.be/1LblNiwICiU
Oops...
Re: fleas
It says the video is private.
Looks great, not looking forward to having to fight it :S.
Looks great, not looking forward to having to fight it :S.
- earthwormjim
- Posts: 1190
- Joined: Thu Sep 16, 2010 4:57 pm
- Location: Secret Undisclosed Moonbase Location
Re: fleas
awesome!
Love the sound it makes when spinning up.
Love the sound it makes when spinning up.
-
- Posts: 3716
- Joined: Sun Apr 03, 2005 5:30 pm
- Location: Antrim, Northern Ireland
- Contact:
-
- Posts: 1134
- Joined: Tue Jan 20, 2004 12:00 am
- Location: London
- Contact:
Re: fleas
That is a suitably silly disk, what Speedo are you using?
I have also got the legs running on my flea, I had to put in some slower motors due to the friction in the cams. Need to solder in the electronics this evening, not much more needed now.
This could be a very silly cluster...
I have also got the legs running on my flea, I had to put in some slower motors due to the friction in the cams. Need to solder in the electronics this evening, not much more needed now.
This could be a very silly cluster...
TEAM GEEK!
-
- Posts: 3716
- Joined: Sun Apr 03, 2005 5:30 pm
- Location: Antrim, Northern Ireland
- Contact:
Re: fleas
It could cope with a heavier disc, there's a lot of weight to be saved on the rx and speedo as the current ones are quite large, but that would have meant buying new a new Speedo and receiver, and cutting a new disc, so I stuck with what I had. It vibrates a lot at low speed, but seems fine at full speed, like it used to when it was on Randar. Andy, any chance I could borrow your prop balancer on the day? Haven't seen mine since I cut this disc about 6 years ago...
Its a HobbyKing 10a speedo, and fortunately I now know how to turn the brake off.
Its a HobbyKing 10a speedo, and fortunately I now know how to turn the brake off.