Power connectors identification / naming

Please post all questions and answers in here. This way people can easily see if someone else has the same problem.

Moderators: BeligerAnt, petec, administrator

Post Reply
User avatar
Posts: 340
Joined: Mon Dec 18, 2017 12:46 pm
Location: Reading Hackspace

Power connectors identification / naming

Post by MarkR »


Perhaps someone knows the names of these power connectors? Perhaps this message will be useful if we add some info here:

1. The discharge plug on many small 2S and 3S lipo batteries. This is a polarised, usually red, female (on the battery end) connector with a pitch of about 2.5mm (it fits 0.1" pin headers without too much difficulty). These are sometimes called just "JST" but JST is a company which makes a massive range of connectors.

2. The charging plug used on small 2S and 3S packs - I think these are probably called JST-XH connectors, and come with variable numbers of pins (2S = 3 pins, 3S = 4 pins, etc). The middle leads are the "cell balancing" leads, they are connected between the series cells so that the charger can charge the cells individually. These connectors are usually white.

3. The plug on small 1S - single lipo cells. These obviously don't need a separate charge / discharge lead, and typically use a very tiny (usually white) polarised female connector. They're often used on very small drones (e.g. toy ones).
Robots: Betsie - RaspberryPi controlled flipper bot with gyro stablisation - too clever for her own good?
Stacie - tidy flipper; 4wd driven by hair bands

User avatar
Posts: 275
Joined: Sun Aug 28, 2016 9:53 pm
Location: Bath, Somerset

Re: Power connectors identification / naming

Post by GeorgeR »

1) JST RCY connector; sometimes called a "bec" connector.
2) yep, those are JST-XH connectors.
3) 1s lipos come with a variety of different connectors, but the most common seem to be the Molex Picoblade (that's what the small nano-tech ones have).
Team Zero - AWS 58 Champion!
Zero - rambot - - Axiom - axebot - - Valkyrie - drum spinner
Blueprint - rambot - - Vampire - horizontal spinner - - Particle - ???
RBMK - quad spinner gyro walker - - Duality - dual spinner gyro walker

Ant Ipodean
Posts: 41
Joined: Mon Apr 24, 2017 3:31 pm
Location: Auckland, New Zealand

Re: Power connectors identification / naming

Post by Ant Ipodean »

3) These are probably a "JST DS LOSI 2.0MM 2 Pin Connector". The plugs have flat pins, exposed on one side.


Post Reply