AWS 57 (February 2019)
Moderators: BeligerAnt, petec, administrator
Re: AWS 57 (February 2019)
Well many of the fights will last less than 1 minute, the trick is to optimise the time between fights, not the fights themselves. Changing the maximum time makes little difference because hardly any bouts last that long anyway.
The trick is, based on my limited experience, to give competitors a well-publicised list of who's fighting next, at least 3-4 fights ahead. ideally on big screens, so nobody gets hoarse from constantly shouting out robot names (At AWS55 that nearly worked, at least some of the time).
This also means that refs and judges need to be rotated (they will need a break at some point) so that the fights can continue.
I can't make it this time, but hopefully the next one, or at least in summer.
The trick is, based on my limited experience, to give competitors a well-publicised list of who's fighting next, at least 3-4 fights ahead. ideally on big screens, so nobody gets hoarse from constantly shouting out robot names (At AWS55 that nearly worked, at least some of the time).
This also means that refs and judges need to be rotated (they will need a break at some point) so that the fights can continue.
I can't make it this time, but hopefully the next one, or at least in summer.
Robots: Betsie - RaspberryPi controlled flipper bot with gyro stablisation - too clever for her own good?
Stacie - tidy flipper; 4wd driven by hair bands
Stacie - tidy flipper; 4wd driven by hair bands
Re: AWS 57 (February 2019)
+1 on lots of notice for upcoming fights... 2 of my bots may be sharing a receiver as the ones i ordered 2 weeks ago still have not arrived... uk seller apparently... also the esc's i ordered are still m.i.a...
although the calibration weights i ordered arrived so my bots should weigh 150g or less...
my scales claim 146g or there abouts with 150g weights on them but this changes from time to time... cheap ebay scales... so i have taken to weighing the weights then my bots... my only issue is that 1 bot fits snugly into my 4x4x4 cube... its unlikely to have fit in the antfreeze cube and my cube is definitely 4x4x4... im hoping the aws cube is more accurate... otherwise, im all good for tomorrow
although the calibration weights i ordered arrived so my bots should weigh 150g or less...
my scales claim 146g or there abouts with 150g weights on them but this changes from time to time... cheap ebay scales... so i have taken to weighing the weights then my bots... my only issue is that 1 bot fits snugly into my 4x4x4 cube... its unlikely to have fit in the antfreeze cube and my cube is definitely 4x4x4... im hoping the aws cube is more accurate... otherwise, im all good for tomorrow
Team Rocket
Trappist 1(4wd grab 'n' lift)
Ton 618 (4wd expanding bot)
Io(4wd flipper)
Trappist 1(4wd grab 'n' lift)
Ton 618 (4wd expanding bot)
Io(4wd flipper)
Re: AWS 57 (February 2019)
lucky me, my receivers arrived today... now its just the amount of time it takes to switch it on and select the model...
Team Rocket
Trappist 1(4wd grab 'n' lift)
Ton 618 (4wd expanding bot)
Io(4wd flipper)
Trappist 1(4wd grab 'n' lift)
Ton 618 (4wd expanding bot)
Io(4wd flipper)
Re: AWS 57 (February 2019)
I'm gonna have to pull out due to illness and unfinished bots.
at least you'll all finish a couple of minutes earlier!
have fun!

at least you'll all finish a couple of minutes earlier!

have fun!
Team BLEEP Suspicious Houmous / Sprouting Potato / Fermented Melon / Black Carrot
Re: AWS 57 (February 2019)
Evening all
Any problems tomorrow my mobile number is above.
(Signal is not great in the village)
Any problems tomorrow my mobile number is above.
(Signal is not great in the village)
Last edited by Spaceman on Sat Feb 23, 2019 6:36 am, edited 1 time in total.
Team 1202
Robototron (Flipper)
Crabulon (Walker)
Robototron (Flipper)
Crabulon (Walker)
Re: AWS 57 (February 2019)
Antlog is now exported.
Any other changes we can sort out tomorrow
Any other changes we can sort out tomorrow

Team 1202
Robototron (Flipper)
Crabulon (Walker)
Robototron (Flipper)
Crabulon (Walker)
Re: AWS 57 (February 2019)
Thanks to all for coming
Thanks to Pete for then arena, harry for filming and Dave for his help
See you all in june
Thanks to Pete for then arena, harry for filming and Dave for his help
See you all in june
Team 1202
Robototron (Flipper)
Crabulon (Walker)
Robototron (Flipper)
Crabulon (Walker)
Re: AWS 57 (February 2019)
And thanks for those who donated as well. Much appreciated.
Team 1202
Robototron (Flipper)
Crabulon (Walker)
Robototron (Flipper)
Crabulon (Walker)
- UserFriendly
- Posts: 119
- Joined: Wed Feb 18, 2015 3:52 pm
Re: AWS 57 (February 2019)
Thanks for a great event, seemed to run pretty well.
We decided to leave early for the 3 hour drive home, so didn't see who won.
So who did?!
We decided to leave early for the 3 hour drive home, so didn't see who won.
So who did?!
Andy B - Team UserFriendly
Reading Cybernetics Graduate 1996
Trying not to take Antweights too seriously. I think I'm failing.
First AWS was 46.
Reading Cybernetics Graduate 1996
Trying not to take Antweights too seriously. I think I'm failing.
First AWS was 46.
Re: AWS 57 (February 2019)
thanks for hosting a great event...
both me and my mrs had a great time...
looking forward to the next event
both me and my mrs had a great time...
looking forward to the next event
Team Rocket
Trappist 1(4wd grab 'n' lift)
Ton 618 (4wd expanding bot)
Io(4wd flipper)
Trappist 1(4wd grab 'n' lift)
Ton 618 (4wd expanding bot)
Io(4wd flipper)