New Nanoweight Arena
Moderators: BeligerAnt, petec, administrator
New Nanoweight Arena
I'm going to be building a new fully enclosed Nanoweight arena for the weight class. By keeping it its own fully enclosed arena it can allow us to run both nanos and fleas at the same time (EO permitting) to help have more time for the main event or simply side events.
I'm aiming to keep it balanced to allow fair melees as well as 1vs1's but also to help provide ample opportunity for nanos to take advantage of arena features. The outer design will be much like Petes ant arena with 3m polycarb kick plates and a 1.5mm bent cover, should be more than enough to contain nanos but help keep it light and not too expensive. I might also experiment with features like built in clock and lights. I'd like to paint the arena but grip always concerns me, I'm not fully sure on what type of paint works well for fighting robot arenas without turning it into an ice rink. Also if anyone has the measurements of the current one that'd be great as that's a decent size for fighting.
However I'd like your ideas on what you'd like to see in the arena. Whether it simply be how high you want the walls to whether you'd like to see hazards or odd shapes involved then let me know!
- Alex
I'm aiming to keep it balanced to allow fair melees as well as 1vs1's but also to help provide ample opportunity for nanos to take advantage of arena features. The outer design will be much like Petes ant arena with 3m polycarb kick plates and a 1.5mm bent cover, should be more than enough to contain nanos but help keep it light and not too expensive. I might also experiment with features like built in clock and lights. I'd like to paint the arena but grip always concerns me, I'm not fully sure on what type of paint works well for fighting robot arenas without turning it into an ice rink. Also if anyone has the measurements of the current one that'd be great as that's a decent size for fighting.
However I'd like your ideas on what you'd like to see in the arena. Whether it simply be how high you want the walls to whether you'd like to see hazards or odd shapes involved then let me know!
- Alex
Nuts And Bots - For all your components and ready built antweights!
Alex Shakespeare - Team Shakey / Nuts And Bots / Team Nuts:
AWS 44, 45, 49, 51 & 55 Winner - Far too many robots!
Alex Shakespeare - Team Shakey / Nuts And Bots / Team Nuts:
AWS 44, 45, 49, 51 & 55 Winner - Far too many robots!
-
- Posts: 433
- Joined: Sun Nov 30, 2014 9:34 pm
- Location: Stroud,Gloucestershire
Re: New Nanoweight Arena
Go full battlebots with hammers XD one thing that I thought was painful but interesting was the arena spinners shown here, more, might be interesting to have some form of nano flinger:
https://m.youtube.com/watch?v=lP-pLyN_kpw
https://m.youtube.com/watch?v=lP-pLyN_kpw
Team Badger
Has a 3d printer now yay
-£4.82+VAT (intact)
-cool modulated printed thingy
-not yet built nasty mean spinnt thingy
I'm gonna build something huge and stupid, try and stop me
Has a 3d printer now yay
-£4.82+VAT (intact)
-cool modulated printed thingy
-not yet built nasty mean spinnt thingy
I'm gonna build something huge and stupid, try and stop me
- botomatic1000
- Posts: 231
- Joined: Sat Mar 12, 2016 5:59 pm
- Location: Kings Heath, Birmingham
Re: New Nanoweight Arena
I would love to see a square arena with a circle pit in the middle with ramps around it and ramps facing out wards at the arena walls where people can get pushed off. Also some elevated platforms as well.
Ethan Wall KINGS HEATH COLLIDERS
Current Robots: Sprat Bait: The worst 150g Wedge ever built...
Elysium 1.4: Antweight Undercutter, built by Team Riptide, Brummie glass cannon edition!
Barracuda: Beetleweight Vert... hates working...
Current Robots: Sprat Bait: The worst 150g Wedge ever built...
Elysium 1.4: Antweight Undercutter, built by Team Riptide, Brummie glass cannon edition!
Barracuda: Beetleweight Vert... hates working...
-
- Posts: 433
- Joined: Sun Nov 30, 2014 9:34 pm
- Location: Stroud,Gloucestershire
Re: New Nanoweight Arena
Don't worry Alex all we want is a sloping multi story revolutionary death arena, no biggie
Team Badger
Has a 3d printer now yay
-£4.82+VAT (intact)
-cool modulated printed thingy
-not yet built nasty mean spinnt thingy
I'm gonna build something huge and stupid, try and stop me
Has a 3d printer now yay
-£4.82+VAT (intact)
-cool modulated printed thingy
-not yet built nasty mean spinnt thingy
I'm gonna build something huge and stupid, try and stop me
Re: New Nanoweight Arena
I'm still trying to keep this friendly for use in a NWS guys
Nuts And Bots - For all your components and ready built antweights!
Alex Shakespeare - Team Shakey / Nuts And Bots / Team Nuts:
AWS 44, 45, 49, 51 & 55 Winner - Far too many robots!
Alex Shakespeare - Team Shakey / Nuts And Bots / Team Nuts:
AWS 44, 45, 49, 51 & 55 Winner - Far too many robots!
-
- Posts: 433
- Joined: Sun Nov 30, 2014 9:34 pm
- Location: Stroud,Gloucestershire
Re: New Nanoweight Arena
I do think a sorta central put that isn't a side ditch would be sorta cool, maybe even with a manual pit release that we could put down once a nano drives into a fake pad
Team Badger
Has a 3d printer now yay
-£4.82+VAT (intact)
-cool modulated printed thingy
-not yet built nasty mean spinnt thingy
I'm gonna build something huge and stupid, try and stop me
Has a 3d printer now yay
-£4.82+VAT (intact)
-cool modulated printed thingy
-not yet built nasty mean spinnt thingy
I'm gonna build something huge and stupid, try and stop me
- joey_picus
- Posts: 1137
- Joined: Tue Jan 13, 2009 1:51 pm
- Location: Lancaster, Lancashire
- Contact:
Re: New Nanoweight Arena
I think a manual pit release or any active hazards is probably a little much XD I would like to see a central pit though, and starting squares - pretty please not red and blue!
Joey McConnell-Farber - Team Picus Telerobotics - http://picus.org.uk/ - @joey_picus
"These dreams go on when I close my eyes...every second of the night, I live another life"
"These dreams go on when I close my eyes...every second of the night, I live another life"
- botomatic1000
- Posts: 231
- Joined: Sat Mar 12, 2016 5:59 pm
- Location: Kings Heath, Birmingham
Re: New Nanoweight Arena
Orange outline and a dark blue arena
Ethan Wall KINGS HEATH COLLIDERS
Current Robots: Sprat Bait: The worst 150g Wedge ever built...
Elysium 1.4: Antweight Undercutter, built by Team Riptide, Brummie glass cannon edition!
Barracuda: Beetleweight Vert... hates working...
Current Robots: Sprat Bait: The worst 150g Wedge ever built...
Elysium 1.4: Antweight Undercutter, built by Team Riptide, Brummie glass cannon edition!
Barracuda: Beetleweight Vert... hates working...
- peterwaller
- Posts: 3213
- Joined: Fri Feb 15, 2002 12:00 am
- Location: Aylesbury Bucks
- Contact:
Re: New Nanoweight Arena
The main trouble with an open pit in the middle is that many Nano's tend to a bit fast and uncontrollable so are likely to pit themselves. (especially if I am driving them)
Having said that I am at present building a new ten to the minus nine with an extra gear ratio like one billionth to try to make it more driveable.
Having said that I am at present building a new ten to the minus nine with an extra gear ratio like one billionth to try to make it more driveable.
Re: New Nanoweight Arena
My nanoweight arena (the one currently used) is 70cm by 60 cm. It has one inch walls and four drop off gaps. I think it would be great to see a more professionally built one as mine is just glued together, the walls are a bit uneven and after several events the floor is pretty scuffed.
Daniel Jackson.
Team Hectic.
Many antweights
Super antweights: territorial.
Fleaweights: fleadom fighter, gaztons.
Featherweights: hectic (under construction)
Team Hectic.
Many antweights
Super antweights: territorial.
Fleaweights: fleadom fighter, gaztons.
Featherweights: hectic (under construction)