New Robots- Continued

[joey_picus]

Actually Joey, both the finalists at the last AWS had their name on them...

Note the number I referred to Dave ;P sorry, hehe...

Two very nice looking robots there guys what's driving Kiwi?

[Remote-Controlled Dave]

Ahh, I never take note of what number we're up to. Lol.

[Anoptimistprime]

I now finally have antid..... Etc up and running with a grabber type weapon, I also have a flipper that I could easily change onto the place of the grabber, is this allowed
Say I'm doing okay but it needs abit of adjustment could I swap the weapon?
I don't mean in the middle of a battle I mean like in the tournament?
Probably completely against the rules but worth asking

[haz]

sure you can

[Remote-Controlled Dave]

Yep, that is completely within the rules, been done a few times before. All that it means is that you'll weigh in with whichever set up is the heaviest in place. This doesn't mean you have to use the heaviest set up, you could swap around before every match if you really wanted to.

[daliad100]

My new ant for the AWS:
Weight: 152g atm but I can still cut down the rather huge m5 bolts holding the front on and shorten some wires
Armour: 2mm welded ABS main shell, 2mm shower pump metal (aluminium I think) on the front + an impenetrable duct tape cover for the hole in the lid
Drive: 50:1 hp motors and 32mm wheels
Battery: 3s 180mah lipo

Needs a name and some decoration though...

[Remote-Controlled Dave]

I'd call it....Accident Blackspot. That, or something silly like I Don't Think We're Insured for This.

[Anoptimistprime]

http://s1088.photobucket.com/albums/i33 ... AG0207.jpg

Here's my two finally finished

On the left its antidisestablishmentarienism (probably wrong spelling)
And btbboh on the right
(Most from memory)
Anti...m
Weight: 148.7
Armour: 1mm polycarb
Weapon:changeable (grabber or flipper)
Drive:50:1 motors and pololu wheels with Pete w option d board
Battery:2s loop 300mah

Btbboh
Weight:137(ish)
Armour:1mm polycarb style plastic
Weapon:SCOOPer
Drive:towerpro servos lego wheels
battery:6v nimh 120mah (ish)

[Craig_Anto3]

due to an unforeseen impact related incident (I hammered the motor too hard into its slot) Badgerbot will not be at AWS35, instead I've revived a golden oldie
my replacement ......



Anto 3 Generation 1, the same wheels and drive from AWS6

[Remote-Controlled Dave]

Call it Retro! Or Anto 8-Bit!