Hello, I am new to building robots and i have a few questions about the best things to get, and were to get them
1. Were can i get some cheap metal (like aliminuim)?
2. Were can i get prehacker micro servos?
3. Were can i get a cheap mixer?
4. Wear can i buy lightweight, cheap battery packs?
Thanks
Questions
Moderators: BeligerAnt, petec, administrator
- Bouncy_Bot
- Posts: 26
- Joined: Fri Aug 19, 2005 8:42 am
- Location: In your left ear.....
- Contact:
Questions
Nick, Ambitious Ants
"All you have to do, is go up to somebody's house, ring the bell, and say, 'Trick or Treat!' "
"Are you sure it's legal?"
"Of course it's legal."
"I wouldn't want to be accused of taking part in a rumble."
"All you have to do, is go up to somebody's house, ring the bell, and say, 'Trick or Treat!' "
"Are you sure it's legal?"
"Of course it's legal."
"I wouldn't want to be accused of taking part in a rumble."
1.havnt a clue
2.pete c's antshop
3.ebay
4.recargeable ni cads stikalite batteries lipo cells i would sugest http://www.indoor.flyer.co.uk/
2.pete c's antshop
3.ebay
4.recargeable ni cads stikalite batteries lipo cells i would sugest http://www.indoor.flyer.co.uk/
1. I get mine from a shop where you also can get tools, electronics, toys etc. donno what you have in England.
2. as Josh said. But hacking a servo isn't that hard really, it is better that you learn how to hack it by yourself. But we shouldnt make Pete C broke by not buying his servos, or should we
3. I looked on ebay for a v-tail mixer, but only from the US. But v-tal mixers dosent cost much now days, so I would be looking at either Sussex model centre (even if they can mess it up sometimes) or any other hobby shop.
4. A good choise is lithium polymere, or as we call it, lipos. But as for a beginner you should stick to Nickel cadium (if spelled correct) or Ni-Hm, as if you would missbehave with lithium, it can explode!
a question from me:
Where can I find Futaba 6exa transmitter, and only the transmitter. I found this shop: http://www.howesmodels.co.uk/, but how do I know its a shop to trust on?
2. as Josh said. But hacking a servo isn't that hard really, it is better that you learn how to hack it by yourself. But we shouldnt make Pete C broke by not buying his servos, or should we
3. I looked on ebay for a v-tail mixer, but only from the US. But v-tal mixers dosent cost much now days, so I would be looking at either Sussex model centre (even if they can mess it up sometimes) or any other hobby shop.
4. A good choise is lithium polymere, or as we call it, lipos. But as for a beginner you should stick to Nickel cadium (if spelled correct) or Ni-Hm, as if you would missbehave with lithium, it can explode!
a question from me:
Where can I find Futaba 6exa transmitter, and only the transmitter. I found this shop: http://www.howesmodels.co.uk/, but how do I know its a shop to trust on?