Please post all questions and answers in here. This way people can easily see if someone else has the same problem.
Moderators: BeligerAnt , petec , administrator
Andrew_Hibberd
Posts: 1134 Joined: Tue Jan 20, 2004 12:00 am
Location: London
Contact:
Post
by Andrew_Hibberd » Fri Apr 29, 2005 1:36 pm
No, it doesn't work
, it does with 3-try pressing three at once 8)
if you take the funnel off you get a lot more force so it works with two
almost got expeled for these experaments
TEAM GEEK!
BeligerAnt
Posts: 1872 Joined: Wed May 15, 2002 12:00 am
Location: Brighton
Contact:
Post
by BeligerAnt » Fri Apr 29, 2005 5:41 pm
Unfortunately I don't get to have
that much fun at work!
As Andrew says, you need to dump enough CO2 at a fast enough rate for it to work. Watch "Brainiac : Science Abuse" on Sky if you get the chance. Those lucky people get paid to do just that sort of crazy experiment! 8)
Gary, Team BeligerAnt
petec
Posts: 555 Joined: Wed Jan 23, 2002 12:00 am
Location: Burgess Hill, West Sussex
Contact:
Post
by petec » Fri Apr 29, 2005 8:02 pm
I feel I should put a note to say that high pressure compressed gas is very dangerous and should only be handled by people with the correct knowledge.
There....now, if you can cut the three horns and weld them back into a single horn with three inputs, you'll really be rocking and rolling....
------------
RobotWars101.org
RobotWars101.co.uk
Antweights.com
Antweights.co.uk
AntweightWorldSeries.com
BeligerAnt
Posts: 1872 Joined: Wed May 15, 2002 12:00 am
Location: Brighton
Contact:
Post
by BeligerAnt » Fri Apr 29, 2005 8:31 pm
... Fix them to a racing wheelchair ...
(should this go in the OT section???)
Gary, Team BeligerAnt