Location
St. Lukes Church
Poulton
Wallasey
CH44 3BD
Date
2nd of December 2023
Time
11:00 - 17:00
As last time, we are planning to split the robots off into 8 round robin heats if there is sufficient numbers with the top robot of that heat going through the quarter-finals and then a straight elimination from there. If there isn't enough robots to justify 8 heats, we'll revert back to the 4 heat system with the top two going through as normal. As always, there will be a all robot rumble as well.
This is primarily an Antweight event but if you wish to do a static display of your Featherweight and heavier class robots, please feel free to bring them with cradles and sharps protection where needed (there will be a dedicated space for Featherweights and heavier). If you bring a non-spinner Beetleweight, we may look to doing something during the event. We are also open to running Fleaweights and Nanoweights if anyone brings them.
We will also be running community vote awards for:
- Most impressive fight
- Most orginal design
- ...a few other possibly fun ideas!
As before, we are running a slightly modified variant of the AWS ruleset (http://robotwars101.org/ants/rules.htm), those being:
2.a: All weight limits have a 5% variance as below. Robots that exceed the AWS weight limit but are within the BotFest limit will have a note applied to the technical check sheet but pass in this instance.
Antweight: 157.5g (Roller) / 236.25g (Walker)
Fleaweight: 78.75g (Roller) / 118.65g (Walker)
Nanoweight: 26.25g (Roller) / 39.9g (Walker)
2.b: All size limits have a 5% variance, so the dimension cubed that your robot must into is below. Robots that exceed the AWS weight limit but are within the BotFest limit will have a note applied to the technical check sheet but pass in this instance.
Antweight: 106.68mm
Fleaweight: 80.01mm
Nanoweight: 63mm
4.a: All heat matches will last 2 minutes. All other matches (except the All Robot Rumble and Side events) will last 3 minutes. The All Robot Rumble will last until one robot remains mobile. Side event runtime are determined on the day.
5.k A team is permitted to enter up to 3 robots of either a roller or walker.
This is a quite laid back event, ideal for both newcomers to the sport and for experienced peeps looking to get their new designs tested before a more major event like AWS (though I know this year, BotFest is happening after AWS). No objections to people coming to watch if so desired.
Hope to see you all there!
