+++TITANIUM+++

Post by **BeligerAnt** » Thu Dec 30, 2010 12:15 pm

I noticed the other day that Blacks (camping/outdoor pursuits shop) sell titanium tent pegs, some made from angle plate, others made from wire/rod.

May be of use to someone...

http://www.blacks.co.uk/product/094735/ ... ute=165468
http://www.blacks.co.uk/product/095883/ ... ute=168869

(I'm sure they were cheaper in-store)

Viper · Post by **Viper** » Thu Dec 30, 2010 1:33 pm

Found this the other day. May be a more reliable supply than Ebay.

325mm X 120mm X 1mm.

It doesn't say what grade it is but if it's for car mods presumably it isn't grade 5! They also have rod on the site.

http://www.quality-tuning.com/spare-par ... rrency=GBP

peterwaller · Post by **peterwaller** » Mon Jan 10, 2011 8:37 pm

Just looking on ebay and there are quite a few bits of titanium there mostly from the Isle of Wight.
Search Titanium Sheet.

Jonny · Post by **Jonny** » Mon Jan 10, 2011 8:40 pm

might shove my titanium on there soon

Team Orr · Post by **Team Orr** » Tue Jan 11, 2011 5:37 pm

peterwaller wrote: mostly from the Isle of Wight.

what! why was i not informed of this!

lol, anyway, good find dude ^^

Gizz · Post by **Gizz** » Sun Mar 13, 2011 11:16 am

Was a bit unsure when it comes to working with TI.

Just to make sure when suming it up: I should drill with a slow speed and preferrably with a cobalt drill and use some fluid?
When it comes to cutting shall i use some grinding bit on a dremel or similar or could i easily cut / saw it with some other tool?

I've ordered a piece of 1mm grade 2 titanium, which on ebay there are 2 more for a reasonable price:

http://cgi.ebay.com/Titanium-sheet-plat ... 1c1a10083f

Viper · Post by **Viper** » Sun May 29, 2011 8:36 pm

There's quite a bit of titanium sheet on Ebay at the moment. Grade 2, I've just got some of this as well as some 1mm offcuts.

http://cgi.ebay.co.uk/Titanium-sheet-0- ... ht_500wt_1

Jonny · Post by **Jonny** » Thu Sep 22, 2011 7:34 pm

i've bought a sheet of 0.6mm ti grade 5 for electric eel 4, i doubt i'll be using alot of it so if anyone needs some gimme a shout

i also have some 1mm grade 2 lying about aswell

Andrew_Hibberd · Post by **Andrew_Hibberd** » Thu Feb 16, 2012 4:10 pm

I am looking out for some Ti, or suitable replacement. Ebay seems to have 0.6 and 1.6mm atm, which is I think will be too thin and too thick. 5cm by 14cm would easily cover what I need, does anyone have anything lying arround or know a good source?

Jonny · Post by **Jonny** » Thu Feb 23, 2012 9:04 am

I have that in 1mm to if that's any good for you?

RobotWars101

+++TITANIUM+++

Re: +++TITANIUM+++

Re: +++TITANIUM+++

Re: +++TITANIUM+++

Re: +++TITANIUM+++