slightly more serious thoughts towards a nano

If Fleaweights are just too big...

Moderators: BeligerAnt, petec, administrator

Occashokka
Posts: 433
Joined: Sun Nov 30, 2014 9:34 pm
Location: Stroud,Gloucestershire

Re: slightly more serious thoughts towards a nano

Post by Occashokka »

Those motors might be tempting except I'm working on a small budget because titanium only comes in squares and my other robot needs a Long thin piece and that's not going to be cheap, and my budget is also wavering at the moment because exuberant has packed in and it's either a motor that's bust which I could fix for free or the main esc which seems to be dowsed in a lot of solder from the last 18 month of repairs. Also Although it's a little heavy would that orange actually do the job?
Team Badger
Has a 3d printer now yay
-£4.82+VAT (intact)
-cool modulated printed thingy
-not yet built nasty mean spinnt thingy

I'm gonna build something huge and stupid, try and stop me :P

Rapidrory
Posts: 1160
Joined: Sun Nov 24, 2013 9:54 pm

Re: slightly more serious thoughts towards a nano

Post by Rapidrory »

I've seen those before, but always put them in the 'too expensive' category... I guess it depends on your budget though.
Rory Mangles - Team Nuts

Robots: Nuts 2 and many more...

NanoTwo Motor Controllers: https://nutsandbots.co.uk/product/nanotwodualesc

Occashokka
Posts: 433
Joined: Sun Nov 30, 2014 9:34 pm
Location: Stroud,Gloucestershire

Re: slightly more serious thoughts towards a nano

Post by Occashokka »

Im nearly there for parts now but i made the stupid mistake of getting a 1s lipo i can't charge, so i need a cheap chinese 1s charger that will do the job with minimum expense, so i wanted to check if this works: http://www.ebay.co.uk/itm/3-7v-600mah-2 ... SwuhhXXXIr it comes with 4 batteries that can be charged which are too big but they mean i can pinch their cables and solder them onto my battery if this charger is one that will work with a little round ~70mah(i think) battery
Team Badger
Has a 3d printer now yay
-£4.82+VAT (intact)
-cool modulated printed thingy
-not yet built nasty mean spinnt thingy

I'm gonna build something huge and stupid, try and stop me :P

Post Reply