Unofficial Rules
Moderators: BeligerAnt, petec, administrator
- BeligerAnt
- Posts: 1872
- Joined: Wed May 15, 2002 12:00 am
- Location: Brighton
- Contact:
As a parent of young(er) children, I don't honestly see what the difference is between ants and superants. We already have children at ant events with all sorts of sharp blades and spinners around.
We already have rules in place to ensure blades are covered outside of the arena.
Youngsters building robots will be exposed to scalpels/craft knives, hot-melt glue guns, soldering irons, superglue etc etc before they even get to an event!
I really don't want superants to become so watered-down that it loses it's appeal otherwise we will have defeated the object of having it!
Also, I don't really expect a huge influx of very young children. I think broke teenagers and adults (possibly with young children) are more likely.
The only concern I have is that we as organisers of an event may be held liable for little Johnny's safety at an event. All we can do to counter this is to explain carefully to parents that we are *not* responsible for their children or their safety and that they are responsible for their children at all times. If they choose to leave their children at an event that's up to them.
I also think that the attitudes of competitors (whatever their age) are different to "the general public". We understand and are aware of the (potential) dangers of the robots (not just our own, but other peoples' too) and treat them with the respect they deserve. Public events are a different kettle of fish and do require a keen eye kept on visitors to ensure their (and the robots!!) safety.
Just my (rather long) 2p's worth.
We already have rules in place to ensure blades are covered outside of the arena.
Youngsters building robots will be exposed to scalpels/craft knives, hot-melt glue guns, soldering irons, superglue etc etc before they even get to an event!
I really don't want superants to become so watered-down that it loses it's appeal otherwise we will have defeated the object of having it!
Also, I don't really expect a huge influx of very young children. I think broke teenagers and adults (possibly with young children) are more likely.
The only concern I have is that we as organisers of an event may be held liable for little Johnny's safety at an event. All we can do to counter this is to explain carefully to parents that we are *not* responsible for their children or their safety and that they are responsible for their children at all times. If they choose to leave their children at an event that's up to them.
I also think that the attitudes of competitors (whatever their age) are different to "the general public". We understand and are aware of the (potential) dangers of the robots (not just our own, but other peoples' too) and treat them with the respect they deserve. Public events are a different kettle of fish and do require a keen eye kept on visitors to ensure their (and the robots!!) safety.
Just my (rather long) 2p's worth.
Gary, Team BeligerAnt
-
- Posts: 223
- Joined: Sat Apr 30, 2005 9:25 am
- Location: Loughborough
- Contact:
Well have you ever though that a newcommer could already have experience with pneumatics i.e. Mario and Mike Lambert before they began building Heavyweights. I just think limiting things for non safety reasons is rather silly. And after all how much damage can it cause to the opponent realistically? If you bounce any antweight off the roof of the box and back down it will 99% of the time still work.Duff wrote:This wouldn't really be cheap or suitable for newcomers though would it? And I think thats what everyone is looking for in superants.Raizor wrote:Particularly at superant level why are we limiting to 100psi. I have no prob with 100psi working pressure but surely you can safely build an ant in the super class with 750psi (liquid co2) in it.
I believe this for 2 reasons:
1. There are no spinners so the probability of the tank getting damaged is greatly reduced
2. With proper planning I could easily cover the gas tank with 5mm poly all the way around thus virtually impregnable.
- Simon Windisch
- Posts: 1806
- Joined: Tue Apr 15, 2003 12:00 am
- Location: Reading
- Contact:
OK, you asked for people with children's opinions:
Well, my son is six, and I would not let him build a robot with anything sharp on it.
For my school robot club, I had a "no sharps" rule because they were other people's children (although one child did cut his finger on a piece of metal swarf, luckily his dad was supervising him at the time).
If my son were ten then I would allow him scalpel blades etc, probably. But not spinners, they are really dangerous, and could remove your finger, rather than just making it bleed a bit.
Well, my son is six, and I would not let him build a robot with anything sharp on it.
For my school robot club, I had a "no sharps" rule because they were other people's children (although one child did cut his finger on a piece of metal swarf, luckily his dad was supervising him at the time).
If my son were ten then I would allow him scalpel blades etc, probably. But not spinners, they are really dangerous, and could remove your finger, rather than just making it bleed a bit.
-
- Posts: 1134
- Joined: Tue Jan 20, 2004 12:00 am
- Location: London
- Contact:
The no metal armour was added because it is not needed, like the first antweight rules, as the spinners had the tip speed removed then metal armour was introduced.
This is for beginners entering antweights, how many robot (not just ant) builders had 750psi+ pneumatics or a spinning disc?
The blades is complicated, avoiding all sharp edges would elimiate all problems of Johny being cut, but anything requiring a sharp blade would need to be quite complicated- such as a crusher, which a beginner would not produce 8)
This is for beginners entering antweights, how many robot (not just ant) builders had 750psi+ pneumatics or a spinning disc?
The blades is complicated, avoiding all sharp edges would elimiate all problems of Johny being cut, but anything requiring a sharp blade would need to be quite complicated- such as a crusher, which a beginner would not produce 8)
TEAM GEEK!
-
- Posts: 223
- Joined: Sat Apr 30, 2005 9:25 am
- Location: Loughborough
- Contact:
- Simon Windisch
- Posts: 1806
- Joined: Tue Apr 15, 2003 12:00 am
- Location: Reading
- Contact:
Sorry, I realised that I hadn't made my point.
What I was trying to say is that we need to trust the roboteers, or if they are small then their parents, to deal safely with dangerous objects.
Anyway, I would go for
1. Weight = 250g for rollers
2. Weight = 375g for walkers
3. Size = 6" (150mm) cube
4. Metal weapons are permited
5. No rotating weapons
6. Pressurised weapons limited to 100psi
7. No metal armour
What I was trying to say is that we need to trust the roboteers, or if they are small then their parents, to deal safely with dangerous objects.
Anyway, I would go for
1. Weight = 250g for rollers
2. Weight = 375g for walkers
3. Size = 6" (150mm) cube
4. Metal weapons are permited
5. No rotating weapons
6. Pressurised weapons limited to 100psi
7. No metal armour
-
- Posts: 1134
- Joined: Tue Jan 20, 2004 12:00 am
- Location: London
- Contact:
Simon, i didn't fully understand the point, but yes it should be up to parents for saftey. Those rules look ok, but would need some clarification and someone to say ''these are the rules''
Adam, a cheap 2 ch 27mhz set and 2 standard servos could lead to a ?50 SA
Craig, you have a point with the rules being not much different from the antweight rules, but apart from the SUPER ant idea of having a new weight class the idea is to introduce beginners that have the standard parts from a radio set before being able to afford the small ant sized parts
Adam, a cheap 2 ch 27mhz set and 2 standard servos could lead to a ?50 SA
Craig, you have a point with the rules being not much different from the antweight rules, but apart from the SUPER ant idea of having a new weight class the idea is to introduce beginners that have the standard parts from a radio set before being able to afford the small ant sized parts
TEAM GEEK!