Got a nasty surprise when I opened my Accucell charger; it turns out the power supply that came with it came without a plug!
What plug do I need to attach? And how easy is it?!?!
Accucell 6 charger
Moderators: BeligerAnt, petec, administrator
-
- Posts: 71
- Joined: Sat Apr 14, 2018 8:10 am
- Location: Surrey
Accucell 6 charger
Michael - Team MG Robotics
Fledgling Surrey based roboteering team
Antweights:
MicroNewton - flipper
ArmamAnt! - pusher
GFB - flipper (under construction)
Fight or Flight - flipper (under construction)
Fledgling Surrey based roboteering team
Antweights:
MicroNewton - flipper
ArmamAnt! - pusher
GFB - flipper (under construction)
Fight or Flight - flipper (under construction)
- DieGracefullyRobotics
- Posts: 152
- Joined: Mon Apr 02, 2018 7:39 am
Re: Accucell 6 charger
You need a plug like the one on the left of this pic.
https://i.ebayimg.com/images/g/f2kAAOSw ... s-l300.jpg
Should be easy to get one and solder it on.
https://i.ebayimg.com/images/g/f2kAAOSw ... s-l300.jpg
Should be easy to get one and solder it on.
Dave
Die Gracefully Robotics - Barely Even a Proper Team.
Die Gracefully Robotics - Barely Even a Proper Team.
- BeligerAnt
- Posts: 1872
- Joined: Wed May 15, 2002 12:00 am
- Location: Brighton
- Contact:
Re: Accucell 6 charger
Ummm, that looks like a mains cord given that the wires are brown and blue.
If so, you need a 3-pin 13A plug.
It would be very useful if you posted a picture of the whole thing so we could figure out which end of the charger you were talking about. A power supply needs 2 plugs - mains power in and DC power out - you didn't make it clear which one is missing...
If so, you need a 3-pin 13A plug.
It would be very useful if you posted a picture of the whole thing so we could figure out which end of the charger you were talking about. A power supply needs 2 plugs - mains power in and DC power out - you didn't make it clear which one is missing...
Gary, Team BeligerAnt
-
- Posts: 71
- Joined: Sat Apr 14, 2018 8:10 am
- Location: Surrey
Re: Accucell 6 charger
Sorry for the lack of updates, it’s been a busy week. It Turned out I’d bought a fixed installation power supply so I sent it back and bought a new one, due to the compressed time frame I have enough to do already. It was the mains power in plug that was missing.
Michael - Team MG Robotics
Fledgling Surrey based roboteering team
Antweights:
MicroNewton - flipper
ArmamAnt! - pusher
GFB - flipper (under construction)
Fight or Flight - flipper (under construction)
Fledgling Surrey based roboteering team
Antweights:
MicroNewton - flipper
ArmamAnt! - pusher
GFB - flipper (under construction)
Fight or Flight - flipper (under construction)