Please post all questions and answers in here. This way people can easily see if someone else has the same problem.
Moderators: BeligerAnt, petec, administrator
- Posts: 8
- Joined: Mon Sep 25, 2017 2:25 pm
according to the current AWS rules:
2c) Robots must have an externally accessible way of being shut down (e.g. a power switch, removable link or battery plug).
This would seem to allow for the removal of power by simply disconnecting the battery from the rest of the electronics (e.g. pulling apart the JST discharge plug from the ESC), however, every example I find seems to use a small slider switch instead. Have I misinterpreted the rules, or is it simply for convenience?
tl;dr: Are switches mandatory, or can you just disconnect the battery?
- Posts: 1160
- Joined: Sun Nov 24, 2013 9:54 pm
Not mandatory, lots of people just disconnect the battery, it's perfectly fine.
- Posts: 277
- Joined: Sun Aug 28, 2016 9:53 pm
- Location: Bath, Somerset
As Rory said, disconnecting the battery is fine, but it must be easily accessible, so if you need to unscrew a load of screws to get to the battery you would need a switch.
Team Zero - AWS 58 Champion!
Zero - rambot - - Axiom - axebot - - Valkyrie - drum spinner
Blueprint - rambot - - Vampire - horizontal spinner - - Particle - ???
RBMK - quad spinner gyro walker - - Duality - dual spinner gyro walker