Fleaweight?
Moderators: BeligerAnt, petec, administrator
-
bitternboy
- Posts: 759
- Joined: Sat Jun 06, 2009 7:36 pm
- Location: Sheffield
I've got a voltage regulator (for some reason someone was giving them out last reading robot club). In the diagram on your website it shows me how to wire it but I don't have the wires etc. and the capacitors and stuff.
Jonathan Atkinson
Before you criticize another person, first walk a mile in their shoes. Then, when you critisize them, you'll be a mile away and have their shoes.
Before you criticize another person, first walk a mile in their shoes. Then, when you critisize them, you'll be a mile away and have their shoes.
-
BeligerAnt
- Posts: 1872
- Joined: Wed May 15, 2002 12:00 am
- Location: Brighton
- Contact:
As you only need a couple of capacitors, your best bet is your local Maplin shop. You need order code BX03D, and they will set you back all of 15p each! You can also get a small quantity of suitable wire ("equipment wire" or "hook-up wire") from Maplin. Of course you will also need a soldering iron and some solder.
If you already have some wiring between your battery and receiver, you may be able to shorten this and use the left-over bits for the extra wiring.
If you already have some wiring between your battery and receiver, you may be able to shorten this and use the left-over bits for the extra wiring.
Gary, Team BeligerAnt