Flysky i6 issues

Please post all questions and answers in here. This way people can easily see if someone else has the same problem.

Moderators: BeligerAnt, petec, administrator

Post Reply
Tufty
Posts: 105
Joined: Wed Jan 29, 2020 9:39 pm
Location: North Wales

Flysky i6 issues

Post by Tufty »

I've had no issues until this week when I turned the Tx on to sync to a second Rx, and while syncing worked, neither robot now responds and both Rx slow blink. I've posted to the FB Antweight group and the one solution there hasn't made a difference. Any support appreciated, could do with it running before AWS!
Current active ants: Scrooge McDerp | Ply-By-Wire (likely not to see competition) | Grinding Nemo | When Unicorns Go Rogue
User avatar
Kyro
Posts: 412
Joined: Fri Jan 18, 2019 12:36 am

Re: Flysky i6 issues

Post by Kyro »

what esc/rx are you using?
Team Rocket
Trappist 1(4wd grab 'n' lift)
Ton 618 (4wd expanding bot)
Io(4wd flipper)
Tufty
Posts: 105
Joined: Wed Jan 29, 2020 9:39 pm
Location: North Wales

Re: Flysky i6 issues

Post by Tufty »

We got it sorted in the end, just took a few rebind attempts. Using the i6AB rx and the standard BBB antweight drive kit ESC
Current active ants: Scrooge McDerp | Ply-By-Wire (likely not to see competition) | Grinding Nemo | When Unicorns Go Rogue
Post Reply