Speed Controllers
Moderators: BeligerAnt, petec, administrator
- peterwaller
- Posts: 3213
- Joined: Fri Feb 15, 2002 12:00 am
- Location: Aylesbury Bucks
- Contact:
Re: Speed Controllers
To be perfectly honest I can't remember between 2 and 3 weeks is normal for China unless they get held up in customs.
I ordered 4 more on the 18th of June I will try and remember to post when they arrive.
I ordered 4 more on the 18th of June I will try and remember to post when they arrive.
- terminaldamage
- Posts: 180
- Joined: Wed Jan 20, 2010 9:54 pm
- Location: Aberdeen, Scotland
- Contact:
Re: Speed Controllers
That's simply incredible Peter, fantastic work! I know I'm not much of an ant guy, but between your board creations/modifications and Josh's intricate Shapeways constructions, the development and technical standard of antweights has greatly increased over the past few months
Jamie McHarg
RogueTwo Robots
www.rogue-two-robots.vze.com
With great power, comes great reliability.
RogueTwo Robots
www.rogue-two-robots.vze.com
With great power, comes great reliability.
Re: Speed Controllers
Nice work Pete. I got one of those 4ch receivers the other day too, I can't believe how small it is!
- joey_picus
- Posts: 1137
- Joined: Tue Jan 13, 2009 1:51 pm
- Location: Lancaster, Lancashire
- Contact:
Re: Speed Controllers
Those are fantastic Peter, as ever
Joey McConnell-Farber - Team Picus Telerobotics - http://picus.org.uk/ - @joey_picus
"These dreams go on when I close my eyes...every second of the night, I live another life"
"These dreams go on when I close my eyes...every second of the night, I live another life"
Re: Speed Controllers
looking good pete and at only 65g you have plenty of weight to add an incredibly powerful spinning blade to it!
Re: Speed Controllers
hi pete.
do you still do the giant cod esc.
and how much it will cost.
do you still do the giant cod esc.
and how much it will cost.
-
- Posts: 3716
- Joined: Sun Apr 03, 2005 5:30 pm
- Location: Antrim, Northern Ireland
- Contact:
Re: Speed Controllers
Haha, you just wait til you see the rest of ours, Jamie!That's simply incredible Peter, fantastic work! I know I'm not much of an ant guy, but between your board creations/modifications and Josh's intricate Shapeways constructions, the development and technical standard of antweights has greatly increased over the past few months
I love those little receivers too. All of my ants have been happily underweight since purchasing them.
Die Gracefully Robotics
Winner - AWS 39
Winner - AWS 39
- peterwaller
- Posts: 3213
- Joined: Fri Feb 15, 2002 12:00 am
- Location: Aylesbury Bucks
- Contact:
Re: Speed Controllers
Kickboxer I am afraid GiantCod stopped doing the 6 channel receiver my controller was based on and the replacement 7 channel receiver is different in size and form so I can't produce those ones any more.
Re: Speed Controllers
okay.
are there any you make anymore that are quite like them ones?
are there any you make anymore that are quite like them ones?
- peterwaller
- Posts: 3213
- Joined: Fri Feb 15, 2002 12:00 am
- Location: Aylesbury Bucks
- Contact:
Re: Speed Controllers
It depends what you mean by like that one I dont do a module that is compatible with the GiantCod so if you want to use one of those the only option is a D board with lots of flying leads.
By far the best option is the module that goes with the HobbyKing 4Chan receiver see: http://robotwars101.org/forum/viewtopic ... &start=165 5th entry down.
This is compatible with all DSM2 transmitters and if you don't have one you can get one hear for £12.99: http://robotwars101.org/forum/viewtopic.php?f=5&t=1699
By far the best option is the module that goes with the HobbyKing 4Chan receiver see: http://robotwars101.org/forum/viewtopic ... &start=165 5th entry down.
This is compatible with all DSM2 transmitters and if you don't have one you can get one hear for £12.99: http://robotwars101.org/forum/viewtopic.php?f=5&t=1699