Kaaz'min Robot Build Diary

All things antweight

Moderators: BeligerAnt, petec, administrator

Kaazmin
Posts: 39
Joined: Wed Jun 14, 2017 11:02 pm

Re: Kaaz'min Robot Build Diary

Post by Kaazmin »

So after Errors better performance in AWS 53, I decided on a few changes. ^-^ So a complete chassis rebuild was in order, the newly improved error has a sleeker shape and an improved motor mount. Image Oh and glitter ! ^-^
Kaazmin
Posts: 39
Joined: Wed Jun 14, 2017 11:02 pm

Re: Kaaz'min Robot Build Diary

Post by Kaazmin »

Build images here ^-^ Image Image Image Image Image Image Image Image
Hope u like the new design. im hoping to start work on a beetleweight soon so ill be asking about that around. See u guys at Ant Freeze 5 !! ^-^
AntRoboteer
Posts: 440
Joined: Mon Mar 03, 2014 7:01 pm

Re: Kaaz'min Robot Build Diary

Post by AntRoboteer »

Looks mean. :D Look forward to seeing it soon!
Kaazmin
Posts: 39
Joined: Wed Jun 14, 2017 11:02 pm

Re: Kaaz'min Robot Build Diary

Post by Kaazmin »

Hey there guys Error has had a major upgrade. Ive basically rebuilt the entire bot from scratch however my weapon motor seems to be spinning the wrong way. Aside from swapping over the wires is there a way to reverse the spin using the controller. (im now using The nano V3 and a Devo 7E controller)
User avatar
GeorgeR
Posts: 276
Joined: Sun Aug 28, 2016 9:53 pm
Location: Bath, Somerset

Re: Kaaz'min Robot Build Diary

Post by GeorgeR »

You'll need to swap over 2 of the brushless motor wires. The only other option is to hook the weapon esc up to a computer and adjust the firmware, which is way more hassle.

Look forward to seeing it on Saturday.
Team Zero - AWS 58 Champion!
Zero - rambot - - Axiom - axebot - - Valkyrie - drum spinner
Blueprint - rambot - - Vampire - horizontal spinner - - Particle - ???
RBMK - quad spinner gyro walker - - Duality - dual spinner gyro walker
Kaazmin
Posts: 39
Joined: Wed Jun 14, 2017 11:02 pm

Re: Kaaz'min Robot Build Diary

Post by Kaazmin »

Thankies :D I knew I could do it by swapping the wires but just wanted to know if it could be done with the controller ^-^ but thanks for clarifying that will work ^-^.
Paulmchurd
Posts: 224
Joined: Sun Dec 10, 2017 4:39 pm

Re: Kaaz'min Robot Build Diary

Post by Paulmchurd »

You said the spinning blade arrived in the post. Where did you get it cut?
Kaazmin
Posts: 39
Joined: Wed Jun 14, 2017 11:02 pm

Re: Kaaz'min Robot Build Diary

Post by Kaazmin »

K-cut did it for me :D
Post Reply