Small BotBitz ESC.

All things antweight

Moderators: BeligerAnt, petec, administrator

Post Reply
marto
Posts: 25
Joined: Thu Sep 15, 2011 1:05 pm

Small BotBitz ESC.

Post by marto »

So one of our builders suggest I mod this esc from HK.

http://www.hobbyking.com/hobbyking/stor ... sion_.html

Looks about the same as the 6A plush which I have done in the past, but claims 0.7g with no wires.

Is there any interest in this. I have been phasing out the 6A as its a pain to mod, but this is a atmel chip with pins which I could probably make a jig for so might be viable if there is sufficient interest. I ask here as you guys are slightly more crazy than we are. As its avr there is also potential to run PPM signal input from deltang and use it as 2in1 But thats even slightly more insane and very very unlikely I would have time to do it.

Steve
User avatar
limpet
Posts: 404
Joined: Fri Jan 13, 2012 5:18 pm

Re: Small BotBitz ESC.

Post by limpet »

Hi Steve,
Did you go any further with this?
Thanks
John
–-----------------------------

For AntFreeze
https://www.facebook.com/AntFreeze/

For my robots etc.
https://www.facebook.com/13Robotics
Ants, Fleas, Beetles, Feathers & Heavies
marto
Posts: 25
Joined: Thu Sep 15, 2011 1:05 pm

Re: Small BotBitz ESC.

Post by marto »

As I got absolutely 0 interest I never bothered.
User avatar
limpet
Posts: 404
Joined: Fri Jan 13, 2012 5:18 pm

Re: Small BotBitz ESC.

Post by limpet »

Shame, if you come up with any very small speedos for brushed motors then I`m sure they would sell anyway (as long as they are cheap :D ).
Having different choices opens up different approaches to robots.
–-----------------------------

For AntFreeze
https://www.facebook.com/AntFreeze/

For my robots etc.
https://www.facebook.com/13Robotics
Ants, Fleas, Beetles, Feathers & Heavies
marto
Posts: 25
Joined: Thu Sep 15, 2011 1:05 pm

Re: Small BotBitz ESC.

Post by marto »

I will probably be placing an international warehouse order in the next few weeks.

If you want a pair let me know and I will add it on.

Steve
User avatar
limpet
Posts: 404
Joined: Fri Jan 13, 2012 5:18 pm

Re: Small BotBitz ESC.

Post by limpet »

pm sent
–-----------------------------

For AntFreeze
https://www.facebook.com/AntFreeze/

For my robots etc.
https://www.facebook.com/13Robotics
Ants, Fleas, Beetles, Feathers & Heavies
marto
Posts: 25
Joined: Thu Sep 15, 2011 1:05 pm

Re: Small BotBitz ESC.

Post by marto »

I really haven't even looked at this. Instead I got distracted with a 1S board design with a voltage doubler, charger, dual channel ESC & Bluetooth onboard.
Post Reply