Team Yr Morgrug - Builds n stuff

All things antweight

Moderators: BeligerAnt, petec, administrator

PBx
Posts: 83
Joined: Thu Nov 25, 2010 1:14 pm
Location: Bolton

Re: Team Yr Morgrug - Builds n stuff

Post by PBx »

Thanks Chaps, all useful stuff. I had noticed the odd familiar name on their forums :wink:
Team - Yr Morgrug
The joy is the journey
PBx
Posts: 83
Joined: Thu Nov 25, 2010 1:14 pm
Location: Bolton

Re: Team Yr Morgrug - Builds n stuff

Post by PBx »

Well, the new baby has arrived :) it looks just the job. Tried it out with the flashing LEd code (easy when I worked out that the board need external power and couldn't use the USB for power :oops: ).

Next job is to mount all the programmer in a box with a socket on it so everything will be a little more robust and tidy.
Team - Yr Morgrug
The joy is the journey
PBx
Posts: 83
Joined: Thu Nov 25, 2010 1:14 pm
Location: Bolton

Re: Team Yr Morgrug - Builds n stuff

Post by PBx »

Been really busy at work so this went on the back burner for a while. I decided to code from scratch myself in the end. Not too much trouble except for forgetting that I didn't need to do the mixing, so took that out again :oops: . I'm using the pulsein stuff which works fine with 2 channels, and the shutdown on loss of signal works fine as well :)

Next step to put all the bits on a temp chassis rather than have it all flopping around on the table.
Team - Yr Morgrug
The joy is the journey
Post Reply