Ofsted/my friendly uncle/I don't know
Moderators: BeligerAnt, petec, administrator
-
- Posts: 433
- Joined: Sun Nov 30, 2014 9:34 pm
- Location: Stroud,Gloucestershire
Re: Ofsted/my friendly uncle/I don't know
As the wiring is so troublesome we took apart the transmitters just to see and one of them was accessible so we have modded it and if we encounter future problems we can still put it back to how it was but thanks for the offer of help, will update again when it starts spinning
Team Badger
Has a 3d printer now yay
-£4.82+VAT (intact)
-cool modulated printed thingy
-not yet built nasty mean spinnt thingy
I'm gonna build something huge and stupid, try and stop me
Has a 3d printer now yay
-£4.82+VAT (intact)
-cool modulated printed thingy
-not yet built nasty mean spinnt thingy
I'm gonna build something huge and stupid, try and stop me
-
- Posts: 433
- Joined: Sun Nov 30, 2014 9:34 pm
- Location: Stroud,Gloucestershire
Re: Ofsted/my friendly uncle/I don't know
IT MOVES AND IT SPINS AND IT IT LOUD AND AWESOME AND THANK Y'ALL who helped
Team Badger
Has a 3d printer now yay
-£4.82+VAT (intact)
-cool modulated printed thingy
-not yet built nasty mean spinnt thingy
I'm gonna build something huge and stupid, try and stop me
Has a 3d printer now yay
-£4.82+VAT (intact)
-cool modulated printed thingy
-not yet built nasty mean spinnt thingy
I'm gonna build something huge and stupid, try and stop me
Re: Ofsted/my friendly uncle/I don't know
Glad to hear it just make sure that if you turn the transmitter off while the bot is on that the spinner doesn't spin up. (If it does then turn the transmitter back on rather than trying to switch the bot off)
Rory Mangles - Team Nuts
Robots: Nuts 2 and many more...
NanoTwo Motor Controllers: https://nutsandbots.co.uk/product/nanotwodualesc
Robots: Nuts 2 and many more...
NanoTwo Motor Controllers: https://nutsandbots.co.uk/product/nanotwodualesc
-
- Posts: 433
- Joined: Sun Nov 30, 2014 9:34 pm
- Location: Stroud,Gloucestershire
Re: Ofsted/my friendly uncle/I don't know
Yup it's all been tested and is safe, however I need 1 last favour, I know people usually bring acetate but could someone bring spare for my other 2 robots, and may I ask if the name 'Buffy' or 'the grim sweeper' has been taken
Team Badger
Has a 3d printer now yay
-£4.82+VAT (intact)
-cool modulated printed thingy
-not yet built nasty mean spinnt thingy
I'm gonna build something huge and stupid, try and stop me
Has a 3d printer now yay
-£4.82+VAT (intact)
-cool modulated printed thingy
-not yet built nasty mean spinnt thingy
I'm gonna build something huge and stupid, try and stop me
- BeligerAnt
- Posts: 1872
- Joined: Wed May 15, 2002 12:00 am
- Location: Brighton
- Contact:
Re: Ofsted/my friendly uncle/I don't know
I don't think either of those names have been used, but TBH it doesn't really matter too much. Certainly Antlog can cope with 2 robots with the same name even if we can't!
Since names may well get re-used or passed around as time goes on Antlog only requires that the combination of robot name and team are unique, so *every* team could have a robot called "My robot" and it wouldn't break Antlog! (Although it might break the event organisers!)
This does allow someone to send a robot to an AWS in the care of another team, without that team having to enter as two different teams and running the risk of getting drawn against themselves (!)
Since names may well get re-used or passed around as time goes on Antlog only requires that the combination of robot name and team are unique, so *every* team could have a robot called "My robot" and it wouldn't break Antlog! (Although it might break the event organisers!)
This does allow someone to send a robot to an AWS in the care of another team, without that team having to enter as two different teams and running the risk of getting drawn against themselves (!)
Gary, Team BeligerAnt
-
- Posts: 433
- Joined: Sun Nov 30, 2014 9:34 pm
- Location: Stroud,Gloucestershire
Re: Ofsted/my friendly uncle/I don't know
While baby metal and Buffy will only undergo minor changes,ExuberANT is in an unfortunate state of limbo after being ripped to pieces by yours truly after the AWS, only to find the source of the problem, green fluff in the gear boxes and a really loose motor wire, so for my next very bold project may I ask if 1mm polycarbonate could get away with being used as the main material in ants/ fleas, bearing in mind it will either have a large weapon on the front or a large steel wedge so no blades will directly hit it
Team Badger
Has a 3d printer now yay
-£4.82+VAT (intact)
-cool modulated printed thingy
-not yet built nasty mean spinnt thingy
I'm gonna build something huge and stupid, try and stop me
Has a 3d printer now yay
-£4.82+VAT (intact)
-cool modulated printed thingy
-not yet built nasty mean spinnt thingy
I'm gonna build something huge and stupid, try and stop me
- joey_picus
- Posts: 1137
- Joined: Tue Jan 13, 2009 1:51 pm
- Location: Lancaster, Lancashire
- Contact:
Re: Ofsted/my friendly uncle/I don't know
You should be alright with 1mm polycarbonate; I've had issues with it stress cracking when cold folded before so you may want some heat if you're planning on using the same chassis for a while, but it's generally quite robust. You might want something stiffer to mount any big weapons to though!
Joey McConnell-Farber - Team Picus Telerobotics - http://picus.org.uk/ - @joey_picus
"These dreams go on when I close my eyes...every second of the night, I live another life"
"These dreams go on when I close my eyes...every second of the night, I live another life"
-
- Posts: 433
- Joined: Sun Nov 30, 2014 9:34 pm
- Location: Stroud,Gloucestershire
Re: Ofsted/my friendly uncle/I don't know
I've worked out minus the servo I can easily make a new exuberant really light and then realised I can use these:
http://www.ebay.co.uk/itm/20-SETS-Micro ... 1256976731
to make modular weapons as I have enough weight for basically any weapon and then I realised if I removed all weapons and just had 1mm polycarb it would fit in as a flea so I intend to make a robot which can enter the AWS and FWS so extra fights for the little boy who cant afford to buy a fourth esc package XD, in theory this should work great and i've worked out I should have the weight and space to have a 4inch 3mm titanium bar spinner attachment , lets just say if everything works then eventually you won't be seeing much of the steel wedge plan
http://www.ebay.co.uk/itm/20-SETS-Micro ... 1256976731
to make modular weapons as I have enough weight for basically any weapon and then I realised if I removed all weapons and just had 1mm polycarb it would fit in as a flea so I intend to make a robot which can enter the AWS and FWS so extra fights for the little boy who cant afford to buy a fourth esc package XD, in theory this should work great and i've worked out I should have the weight and space to have a 4inch 3mm titanium bar spinner attachment , lets just say if everything works then eventually you won't be seeing much of the steel wedge plan
Team Badger
Has a 3d printer now yay
-£4.82+VAT (intact)
-cool modulated printed thingy
-not yet built nasty mean spinnt thingy
I'm gonna build something huge and stupid, try and stop me
Has a 3d printer now yay
-£4.82+VAT (intact)
-cool modulated printed thingy
-not yet built nasty mean spinnt thingy
I'm gonna build something huge and stupid, try and stop me
- botomatic1000
- Posts: 231
- Joined: Sat Mar 12, 2016 5:59 pm
- Location: Kings Heath, Birmingham
Re: Ofsted/my friendly uncle/I don't know
im interested in this robot it sounds cool very best of luck building it.
Ethan Wall KINGS HEATH COLLIDERS
Current Robots: Sprat Bait: The worst 150g Wedge ever built...
Elysium 1.4: Antweight Undercutter, built by Team Riptide, Brummie glass cannon edition!
Barracuda: Beetleweight Vert... hates working...
Current Robots: Sprat Bait: The worst 150g Wedge ever built...
Elysium 1.4: Antweight Undercutter, built by Team Riptide, Brummie glass cannon edition!
Barracuda: Beetleweight Vert... hates working...
-
- Posts: 433
- Joined: Sun Nov 30, 2014 9:34 pm
- Location: Stroud,Gloucestershire
Re: Ofsted/my friendly uncle/I don't know
I have a feeling I'm going to need all the luck I can get...
Team Badger
Has a 3d printer now yay
-£4.82+VAT (intact)
-cool modulated printed thingy
-not yet built nasty mean spinnt thingy
I'm gonna build something huge and stupid, try and stop me
Has a 3d printer now yay
-£4.82+VAT (intact)
-cool modulated printed thingy
-not yet built nasty mean spinnt thingy
I'm gonna build something huge and stupid, try and stop me