Id be interested, dependent on price.
Currently an rx and esc separately would be around £15. I get there is a mass advantage, and specific application so i expect more than this, but i think i would struggle to justify significantly more than this.
Any idea of price point?
Search found 6 matches
- Fri Feb 07, 2020 10:26 am
- Forum: Antweights
- Topic: ESC with built-in receiver - interesting?
- Replies: 69
- Views: 171732
- Fri Feb 22, 2019 8:29 am
- Forum: Events
- Topic: AWS 57 (February 2019)
- Replies: 47
- Views: 110013
Re: AWS 57 (February 2019)
Is there a second arena that could be used, maybe just for the first round or two?
Its probably not necessary, but could help timings if you are struggling to squeeze everything in.
Its probably not necessary, but could help timings if you are struggling to squeeze everything in.
- Mon Jan 21, 2019 1:09 pm
- Forum: Antweights
- Topic: SG90's at high voltage
- Replies: 5
- Views: 6003
Re: SG90's at high voltage
Just to close this one out for anyone scanning through the forum in the future: -Yes you can run the motor from an SG90 at a high voltage (tested up to 11v stall without any issues) -At around the 11v mark the pinion gear on the motor starts slipping, which effectively protects the rest of the gears...
- Fri Jan 04, 2019 4:37 pm
- Forum: Antweights
- Topic: SG90's at high voltage
- Replies: 5
- Views: 6003
Re: SG90's at high voltage
"we used to use SG90 servos a long time ago but found that the gearboxes were incredibly week but you said its for a spinner so you have probably removed the gearbox, in which case the motor will have such low torque that it probably wont spin anything that has any mass" I have indeed trie...
- Fri Jan 04, 2019 12:21 pm
- Forum: Antweights
- Topic: SG90's at high voltage
- Replies: 5
- Views: 6003
SG90's at high voltage
Hi all, Looking for a little advice on a particularly cheap spinner setup. I have an SG90 that i have wired with a relay so that i can give the motor max volts without burning out the PCB. my question is, has anybody got any idea what voltage these tiny motors will handle before producing lots of sm...
- Fri Jan 04, 2019 11:56 am
- Forum: Antweights
- Topic: Newbies Build Diary.
- Replies: 8
- Views: 17856
Re: Newbies Build Diary.
Hi Matt, I may not be the best person to advise on this as i'm fairly new to antweights too, but i found this version of the SG90 really easy to mod: https://www.ebay.co.uk/itm/SG90-9G-Micro-Servo-Motor-RC-Robot-Arm-Helicopter-Airplane-Remote-Control/153074775766?ssPageName=STRK%3AMEBIDX%3AIT&va...