Sketch Up Library Parts

Please post all questions and answers in here. This way people can easily see if someone else has the same problem.

Moderators: petec, administrator, BeligerAnt

Post Reply
User avatar
peterwaller
Posts: 3655
Joined: Fri Feb 15, 2002 12:00 am
Location: Aylesbury Bucks
Contact:

Sketch Up Library Parts

Post by peterwaller » Mon Feb 18, 2019 2:33 pm

I mentioned in my book that I was gradually building a library of non 3d printable parts such as motorgearboxes, servos and brushless motors in sketchup which I use in my assembly drawings. One of the readers has asked if these could be made available for others to use so I have put them up on 3D warehouse. They are in the form of a single drawing with each object as a separate group or component. In the case of the servos the servo arm and servos are in separate groups so the arm can be rotated to different positions. The drawing is titled Antweight Robot Standard Parts and below is a 2D image of what it contains.
Image
I hope people find it useful and maybe others could put up their 3d components.

Post Reply