Robots i should be making now but have to wait a while to make because reasons.

All things antweight

Moderators: petec, administrator, BeligerAnt

Post Reply
User avatar
TeamScrewUp
Posts: 60
Joined: Mon Oct 02, 2017 6:26 am

Robots i should be making now but have to wait a while to make because reasons.

Post by TeamScrewUp » Sun Aug 26, 2018 5:49 pm

Yay. I have a list of robots that for now. I am not able to make. Or am making. So here they are:
Uh Oh (based off whoops but made poorly)
Nom (dustpan)
AxeBWOT (axeBWOT)

I will add on to this just after AWS56
Daaa
Manta ray (2WD wedge bot)
Poptart tories (Cluster bot)
Nom (dustpan)
RKoh... (Undercutter)
Uh oh (rammer)
Krave-lit (Dustpan)

User avatar
TeamScrewUp
Posts: 60
Joined: Mon Oct 02, 2017 6:26 am

Re: Robots i should be making now but have to wait a while to make because reasons.

Post by TeamScrewUp » Sat Sep 01, 2018 12:44 pm

All of these may start being built in october. Uh oh will be finished soon.
Last edited by TeamScrewUp on Mon Sep 10, 2018 8:38 pm, edited 2 times in total.
Daaa
Manta ray (2WD wedge bot)
Poptart tories (Cluster bot)
Nom (dustpan)
RKoh... (Undercutter)
Uh oh (rammer)
Krave-lit (Dustpan)

User avatar
TeamScrewUp
Posts: 60
Joined: Mon Oct 02, 2017 6:26 am

Re: Robots i should be making now but have to wait a while to make because reasons.

Post by TeamScrewUp » Sun Sep 09, 2018 6:51 am

Adding yet another: only ideas. But still
FLIPAAH (flipper)
Backdrag (flipper)
SNDstorm (Bar spinner)
Last edited by TeamScrewUp on Thu Sep 13, 2018 7:35 am, edited 1 time in total.
Daaa
Manta ray (2WD wedge bot)
Poptart tories (Cluster bot)
Nom (dustpan)
RKoh... (Undercutter)
Uh oh (rammer)
Krave-lit (Dustpan)

User avatar
TeamScrewUp
Posts: 60
Joined: Mon Oct 02, 2017 6:26 am

Re: Robots i should be making now but have to wait a while to make because reasons.

Post by TeamScrewUp » Mon Sep 10, 2018 4:21 pm

Lets add on to Uh Oh. I have had a front plate drawn out and ready to cut. It is 10cm wide and is tall enough to mke the robot invertable. Also. Said plate is made of aluminium. Which is a quarter of a centimetre thick. So hopefully it stands up well.
Daaa
Manta ray (2WD wedge bot)
Poptart tories (Cluster bot)
Nom (dustpan)
RKoh... (Undercutter)
Uh oh (rammer)
Krave-lit (Dustpan)

User avatar
TeamScrewUp
Posts: 60
Joined: Mon Oct 02, 2017 6:26 am

Re: Robots i should be making now but have to wait a while to make because reasons.

Post by TeamScrewUp » Tue Sep 11, 2018 8:03 pm

So uh oh has 2 pannels cut for it. Both out of aluminium. The back pannel is 0.25CM thick. The front plate however.... is 1CM thick. Don't ask how i did it that thick. Im pretty sure it is
Last edited by TeamScrewUp on Wed Oct 10, 2018 7:18 am, edited 1 time in total.
Daaa
Manta ray (2WD wedge bot)
Poptart tories (Cluster bot)
Nom (dustpan)
RKoh... (Undercutter)
Uh oh (rammer)
Krave-lit (Dustpan)

User avatar
TeamScrewUp
Posts: 60
Joined: Mon Oct 02, 2017 6:26 am

Re: Robots i should be making now but have to wait a while to make because reasons.

Post by TeamScrewUp » Thu Sep 13, 2018 7:36 am

The front plate for uh oh has been spray painted red. Yay
Daaa
Manta ray (2WD wedge bot)
Poptart tories (Cluster bot)
Nom (dustpan)
RKoh... (Undercutter)
Uh oh (rammer)
Krave-lit (Dustpan)

User avatar
TeamScrewUp
Posts: 60
Joined: Mon Oct 02, 2017 6:26 am

Re: Robots i should be making now but have to wait a while to make because reasons.

Post by TeamScrewUp » Fri Sep 14, 2018 4:11 pm

And because one is done lets talk about starting another. I like making robots. The new ant is going to be called BARcode. And is to be a vertical Bar spinner. The idea is to have a hdpe body and a steel bar spinner. I am finding parts soon. And maybe i can get it done to compete against some certain robots.....
Daaa
Manta ray (2WD wedge bot)
Poptart tories (Cluster bot)
Nom (dustpan)
RKoh... (Undercutter)
Uh oh (rammer)
Krave-lit (Dustpan)

User avatar
TeamScrewUp
Posts: 60
Joined: Mon Oct 02, 2017 6:26 am

Re: Robots i should be making now but have to wait a while to make because reasons.

Post by TeamScrewUp » Sun Sep 30, 2018 7:17 am

Im planning to bring krave-lit back at some point. Because people seemed to like him. And because it needs a second chance. As version 1 was a faliure becuase of me. (100% true) plans are just to make a new body and mouth. Probbaly gut Axe-BWOT if it doesn't do well. Or but stuff for it. Use an sg90 servo to grab opponents. With all this it should be lighter, shorter, faster, and hopefully more effective. But that is just plans. Im getting closer to being able to make Nom and Axe-BWOT. They should be a cool addition to add to my "team" maybe i will also work on my undercutter called RKoh...
Daaa
Manta ray (2WD wedge bot)
Poptart tories (Cluster bot)
Nom (dustpan)
RKoh... (Undercutter)
Uh oh (rammer)
Krave-lit (Dustpan)

User avatar
TeamScrewUp
Posts: 60
Joined: Mon Oct 02, 2017 6:26 am

Re: Robots i should be making now but have to wait a while to make because reasons.

Post by TeamScrewUp » Tue Oct 09, 2018 6:00 pm

Soooo. This month i am planning to try make the following robots:
Nom
Krave-lit
RKoh...
Hopefully i can update this on how that is going
Daaa
Manta ray (2WD wedge bot)
Poptart tories (Cluster bot)
Nom (dustpan)
RKoh... (Undercutter)
Uh oh (rammer)
Krave-lit (Dustpan)

User avatar
TeamScrewUp
Posts: 60
Joined: Mon Oct 02, 2017 6:26 am

Re: Robots i should be making now but have to wait a while to make because reasons.

Post by TeamScrewUp » Wed Oct 10, 2018 7:36 am

I am thinking the first robots i am making. Are krave-lit and Nom. Nom sjould be half fineshed/finished by the end of october. And krave-lit to be finished too. Hope to keep you all updated
Daaa
Manta ray (2WD wedge bot)
Poptart tories (Cluster bot)
Nom (dustpan)
RKoh... (Undercutter)
Uh oh (rammer)
Krave-lit (Dustpan)

User avatar
TeamScrewUp
Posts: 60
Joined: Mon Oct 02, 2017 6:26 am

Re: Robots i should be making now but have to wait a while to make because reasons.

Post by TeamScrewUp » Thu Oct 11, 2018 7:25 am

The idea for Nom is to be a W I D E boi. However, i think if i do that, i won't have much length to work with. But i think that it should be fine. I am probably going to need to do A LOT of sanding, but if i can get it to work. Then it should be fine
Daaa
Manta ray (2WD wedge bot)
Poptart tories (Cluster bot)
Nom (dustpan)
RKoh... (Undercutter)
Uh oh (rammer)
Krave-lit (Dustpan)

User avatar
TeamScrewUp
Posts: 60
Joined: Mon Oct 02, 2017 6:26 am

Re: Robots i should be making now but have to wait a while to make because reasons.

Post by TeamScrewUp » Mon Oct 15, 2018 8:41 pm

So today ive had parts ordered for nom. And after i will start making the weapon
Daaa
Manta ray (2WD wedge bot)
Poptart tories (Cluster bot)
Nom (dustpan)
RKoh... (Undercutter)
Uh oh (rammer)
Krave-lit (Dustpan)

User avatar
TeamScrewUp
Posts: 60
Joined: Mon Oct 02, 2017 6:26 am

Re: Robots i should be making now but have to wait a while to make because reasons.

Post by TeamScrewUp » Tue Oct 16, 2018 5:29 pm

So these are the robots i will be hopefully working on soon:
Hamartia (flipper)
Nom (dustpan)
SPOON RAVE! (Axe)
Krave-lit (dustpan)
RKoh... (under cutter)
Tiny turtle (spinner) (want to do before RKoh...)
Daaa
Manta ray (2WD wedge bot)
Poptart tories (Cluster bot)
Nom (dustpan)
RKoh... (Undercutter)
Uh oh (rammer)
Krave-lit (Dustpan)

User avatar
TeamScrewUp
Posts: 60
Joined: Mon Oct 02, 2017 6:26 am

Re: Robots i should be making now but have to wait a while to make because reasons.

Post by TeamScrewUp » Mon Oct 22, 2018 6:22 am

So as of now, ive decided to make a new robot called Stanley and the wedges. Which will be a 3 part clusterbot. Which is kinda based off Stanley and wedge wedge wedge. But on a budget??????
They will probably be built in the same way as the poptart tories.

But thats all for now ig
Daaa
Manta ray (2WD wedge bot)
Poptart tories (Cluster bot)
Nom (dustpan)
RKoh... (Undercutter)
Uh oh (rammer)
Krave-lit (Dustpan)

Post Reply