No control
Moderators: BeligerAnt, petec, administrator
No control
I just bound my devo 7e (deviation) to an orange rx r410x (dsmx, the light stopped flashing, so I know that it bound) but when I connect the robot to a battery the lights come on, but the transmitter doesn't control anything and nothing spins. I have the signal wire at the top of the receiver, I turned the transmitter on with the rudder down, I'm using bustophedon escs that were already soldered, and I can't think of anything else that could be wrong it.
Any ideas?
Any ideas?
Tom Boys (Team Tomb)
Up the Antie - Flipper
Push Comes to Shove - Shovebot
Vertigo - Vertical spinner
Bar Bar Black Sheep - Bristlebot (planned)
Up the Antie - Flipper
Push Comes to Shove - Shovebot
Vertigo - Vertical spinner
Bar Bar Black Sheep - Bristlebot (planned)
Re: No control
You need to hold it in bind not only for the light to stop flashing but to then come back and stay on solidly.
https://nutsandbots.co.uk/devo7e/
https://nutsandbots.co.uk/devo7e/
Nuts And Bots - For all your components and ready built antweights!
Alex Shakespeare - Team Shakey / Nuts And Bots / Team Nuts:
AWS 44, 45, 49, 51 & 55 Winner - Far too many robots!
Alex Shakespeare - Team Shakey / Nuts And Bots / Team Nuts:
AWS 44, 45, 49, 51 & 55 Winner - Far too many robots!
Re: No control
I did leave it until the light came back on
Tom Boys (Team Tomb)
Up the Antie - Flipper
Push Comes to Shove - Shovebot
Vertigo - Vertical spinner
Bar Bar Black Sheep - Bristlebot (planned)
Up the Antie - Flipper
Push Comes to Shove - Shovebot
Vertigo - Vertical spinner
Bar Bar Black Sheep - Bristlebot (planned)
Re: No control
Do you have a servo lying around you can use? If the servo works on the RX you'll know the ESC's are the problem, if the servo doesn't it's in the TX/RX. Just helps to start narrow down the cause.
Nuts And Bots - For all your components and ready built antweights!
Alex Shakespeare - Team Shakey / Nuts And Bots / Team Nuts:
AWS 44, 45, 49, 51 & 55 Winner - Far too many robots!
Alex Shakespeare - Team Shakey / Nuts And Bots / Team Nuts:
AWS 44, 45, 49, 51 & 55 Winner - Far too many robots!
Re: No control
I haven't got any spares at the moment to be honest, but I have 2 separate speed controllers, and neither motor turns, even if I attach them separately, so I'm starting to think either the transmitter or receiver doesn't work
Tom Boys (Team Tomb)
Up the Antie - Flipper
Push Comes to Shove - Shovebot
Vertigo - Vertical spinner
Bar Bar Black Sheep - Bristlebot (planned)
Up the Antie - Flipper
Push Comes to Shove - Shovebot
Vertigo - Vertical spinner
Bar Bar Black Sheep - Bristlebot (planned)
- DieGracefullyRobotics
- Posts: 152
- Joined: Mon Apr 02, 2018 7:39 am
Re: No control
Some pictures might help so we can see if you've got everything in the right place. Or even a short video of you trying to bind.
Dave
Die Gracefully Robotics - Barely Even a Proper Team.
Die Gracefully Robotics - Barely Even a Proper Team.
Re: No control
Silly suggestion, I expect, but is the bustophedon turned on? It's the sort of thing I'd do.
edit: never mind, I just noticed you said the light comes on.
edit: never mind, I just noticed you said the light comes on.
Team BLEEP Suspicious Houmous / Sprouting Potato / Fermented Melon / Black Carrot
Re: No control
I'll try to take some photos/videos over the weekend. I won't be in the same house as it until Sunday now anyway.
Hopefully the answer will be that despite all my research on how to do everything, I've just done something (small and easy to fix) wrong while binding it.
Hopefully the answer will be that despite all my research on how to do everything, I've just done something (small and easy to fix) wrong while binding it.
Tom Boys (Team Tomb)
Up the Antie - Flipper
Push Comes to Shove - Shovebot
Vertigo - Vertical spinner
Bar Bar Black Sheep - Bristlebot (planned)
Up the Antie - Flipper
Push Comes to Shove - Shovebot
Vertigo - Vertical spinner
Bar Bar Black Sheep - Bristlebot (planned)
- DieGracefullyRobotics
- Posts: 152
- Joined: Mon Apr 02, 2018 7:39 am
Re: No control
It's often something small. I've been competing well over a decade and the other month I couldn't get a robot to work because I had the bind plug in the wrong socket on a Lemon, ha. Happens to us all.
Dave
Die Gracefully Robotics - Barely Even a Proper Team.
Die Gracefully Robotics - Barely Even a Proper Team.
Re: No control
Hey
I recorded a video of my attempts to bind. Before I turned on with the sticks in the correct position (left stick down)
The bind plug is in the plug marked batt/bind
https://youtu.be/MViQ45Z0PTo
Afterwards I turned both off, removed the bind plug, turned back on with the sticks in the same positions, the lights came on (on the receiver and escs) but no controls worked. I've probably got a setting wrong somewhere.
I recorded a video of my attempts to bind. Before I turned on with the sticks in the correct position (left stick down)
The bind plug is in the plug marked batt/bind
https://youtu.be/MViQ45Z0PTo
Afterwards I turned both off, removed the bind plug, turned back on with the sticks in the same positions, the lights came on (on the receiver and escs) but no controls worked. I've probably got a setting wrong somewhere.
Tom Boys (Team Tomb)
Up the Antie - Flipper
Push Comes to Shove - Shovebot
Vertigo - Vertical spinner
Bar Bar Black Sheep - Bristlebot (planned)
Up the Antie - Flipper
Push Comes to Shove - Shovebot
Vertigo - Vertical spinner
Bar Bar Black Sheep - Bristlebot (planned)