Team Dudge build diaries.
Moderators: BeligerAnt, petec, administrator
-
- Posts: 227
- Joined: Sun Dec 10, 2017 4:39 pm
Re: Team Dudge build diaries.
Looks awesome.
Adding a wedge would be good. The pink oink robots won loads of fights with just a simple wedge.
Adding a wedge would be good. The pink oink robots won loads of fights with just a simple wedge.
-
- Posts: 135
- Joined: Thu Dec 07, 2017 9:32 pm
Re: Team Dudge build diaries.
@Michael nahh nothing special just a can of cheap black spray paint from wilkos
My robots:
Third Law (antweight) - push/ram bot
Manticore (antweight) - hammer bot
Third Law (antweight) - push/ram bot
Manticore (antweight) - hammer bot
-
- Posts: 441
- Joined: Mon Mar 03, 2014 7:01 pm
Re: Team Dudge build diaries.
Looking fantastic. Good to see you got it working nicely.
-
- Posts: 135
- Joined: Thu Dec 07, 2017 9:32 pm
Re: Team Dudge build diaries.
The Third Law rebuild is well underway! He didn't need rebuilding per se, he was working fine, but I wanted a new project and rebuilding him was going to be lots cheaper than a whole new bot project. Plus - there were a bunch of ways to make him better.
Because unlike Manticore with his toffee hammer, I reckon this one could actually be quite competitive with enough driving practice.
Still lots to do but it's coming together. Main new features are weight and height now let me use Shakey's wheels rather than pololu ones for wider tires and hopefully lots more pushing power and most importantly he's got a proper front wedge piece now!
Because unlike Manticore with his toffee hammer, I reckon this one could actually be quite competitive with enough driving practice.
Still lots to do but it's coming together. Main new features are weight and height now let me use Shakey's wheels rather than pololu ones for wider tires and hopefully lots more pushing power and most importantly he's got a proper front wedge piece now!
My robots:
Third Law (antweight) - push/ram bot
Manticore (antweight) - hammer bot
Third Law (antweight) - push/ram bot
Manticore (antweight) - hammer bot
Re: Team Dudge build diaries.
Looks great! I love the lexan bots like this where you can see all the gubbinz inside.
With 4 wheel motors, which batteries do you go for? Still a 2S 200-300mah ?
With 4 wheel motors, which batteries do you go for? Still a 2S 200-300mah ?
Bots:
DisinfectANT (Antweight), Cilit BANG (WIP Antweight), Kinetic Disassembly (WIP Antweight)
DisinfectANT (Antweight), Cilit BANG (WIP Antweight), Kinetic Disassembly (WIP Antweight)
Re: Team Dudge build diaries.
A 180mah is still far more than enough for a 4wd bot. I've run weaponed 6wd robots (taxing 2 motors to power all the wheels) off that size happily.
Nuts And Bots - For all your components and ready built antweights!
Alex Shakespeare - Team Shakey / Nuts And Bots / Team Nuts:
AWS 44, 45, 49, 51 & 55 Winner - Far too many robots!
Alex Shakespeare - Team Shakey / Nuts And Bots / Team Nuts:
AWS 44, 45, 49, 51 & 55 Winner - Far too many robots!
-
- Posts: 135
- Joined: Thu Dec 07, 2017 9:32 pm
Re: Team Dudge build diaries.
Yup 180mah ones here. And yeah they last a good amount of time.
And Eddie haha strangely enough I'm the opposite, I prefer the look of the polycarbonate after painting. I'm not done drilling and sanding yet or it would be black already.
And Eddie haha strangely enough I'm the opposite, I prefer the look of the polycarbonate after painting. I'm not done drilling and sanding yet or it would be black already.
My robots:
Third Law (antweight) - push/ram bot
Manticore (antweight) - hammer bot
Third Law (antweight) - push/ram bot
Manticore (antweight) - hammer bot
Re: Team Dudge build diaries.
Ahh that's good to know. Are they any types of bots which would warrant a larger battery? Big spinners perhaps? Batteries with a very high C rating?
Im sure it will be rocking the stealth ninja-black look! Plasma-nitrite coated polycarb then, right?
I think i just like the clear polycarb since Terrorhurtz is my fave HW bot
Im sure it will be rocking the stealth ninja-black look! Plasma-nitrite coated polycarb then, right?
I think i just like the clear polycarb since Terrorhurtz is my fave HW bot
Bots:
DisinfectANT (Antweight), Cilit BANG (WIP Antweight), Kinetic Disassembly (WIP Antweight)
DisinfectANT (Antweight), Cilit BANG (WIP Antweight), Kinetic Disassembly (WIP Antweight)
Re: Team Dudge build diaries.
The highest I run right now is DHMIS with a 210mah battery with a VERY high C rating. The spinup of that robot is fairly brutal for it electrically. It can happily run a whole match on that though.
Nuts And Bots - For all your components and ready built antweights!
Alex Shakespeare - Team Shakey / Nuts And Bots / Team Nuts:
AWS 44, 45, 49, 51 & 55 Winner - Far too many robots!
Alex Shakespeare - Team Shakey / Nuts And Bots / Team Nuts:
AWS 44, 45, 49, 51 & 55 Winner - Far too many robots!
Re: Team Dudge build diaries.
Hmm I think I'll be wanting smaller batteries then!! Thanks Shakey
Bots:
DisinfectANT (Antweight), Cilit BANG (WIP Antweight), Kinetic Disassembly (WIP Antweight)
DisinfectANT (Antweight), Cilit BANG (WIP Antweight), Kinetic Disassembly (WIP Antweight)