Hi thanks for replying,
So this battery?
http://m.ebay.co.uk/itm/RC-Turnigy-nano ... Ciid%253A1
On the servo, think I'll not to look up how to do that! Don't know electrics at all!
Thanks again for replying.
Mike
TinyTwo Speed Controllers
Moderators: BeligerAnt, petec, administrator
Re: TinyTwo Speed Controllers
In the same boat as you Mike and am also looking to use Rory's system. On the spec sheet linked earlier in the thread there are links to recommended parts, the only one that doesn't work is the battery, I'm looking at using https://hobbyking.com/en_us/turnigy-nan ... b0863.html as its the same power as the one Rory recommended.
Cheers
Jeff.
Cheers
Jeff.
Re: TinyTwo Speed Controllers
That's the same battery just with a different connector. You'd have to swap the connector but it'd work.Mcmad wrote:In the same boat as you Mike and am also looking to use Rory's system. On the spec sheet linked earlier in the thread there are links to recommended parts, the only one that doesn't work is the battery, I'm looking at using https://hobbyking.com/en_us/turnigy-nan ... b0863.html as its the same power as the one Rory recommended.
Cheers
Jeff.
Nuts And Bots - For all your components and ready built antweights!
Alex Shakespeare - Team Shakey / Nuts And Bots / Team Nuts:
AWS 44, 45, 49, 51 & 55 Winner - Far too many robots!
Alex Shakespeare - Team Shakey / Nuts And Bots / Team Nuts:
AWS 44, 45, 49, 51 & 55 Winner - Far too many robots!
Re: TinyTwo Speed Controllers
Ah ok, was a bit keen last night and ordered this one, As I saw it in a how to make a ant weight video.
http://m.ebay.co.uk/itm/221951914488?NAV=HOME
Guess it's the wrong one!?
Thanks
Mike
http://m.ebay.co.uk/itm/221951914488?NAV=HOME
Guess it's the wrong one!?
Thanks
Mike
- peterwaller
- Posts: 3213
- Joined: Fri Feb 15, 2002 12:00 am
- Location: Aylesbury Bucks
- Contact:
Re: TinyTwo Speed Controllers
mlg678 that one is bordering on the large size but would work fine as long as you can accommodate the size and weight and would mean less charging.