TinyTwo Speed Controllers

[Rapidrory]

Just to let you know, I won't be able to ship any ESCs until at least the second week of August.

If you ordered one at the AWS then either drop me an email or PM if you can so I can can contact you if need be.

I also hope to start offering the combo Rx-ESC units mid August.

[Rapidrory]

Tested the 43d deltang setup that Scott was having trouble with; turns out that the rudder channel on the Rx was just dead. Swapped it for the aileron channel and it all worked fine.

Checked it with the other 31b deltang as well and that also worked after a dodgy track was fixed on the Rx.

So the N2xV does work with deltang receivers, as long as the receivers themselves work

[Rapidrory]

Finally got around to doing some proper labels for the ESCs :



Also, if you ordered an ESC at the AWS, they should all be shipping tomorrow.

[Rhys]

Hey Rory, are the HV ones still looking like being done by 23rd august?

[Rapidrory]

Hopefully; the chips I need should come back into stock on the 14th.

[peterwaller]

It is a real pain when that happens I had the same problem with my drive chips I have bought them from USA and Poland when the UK ran out.

[Remote-Controlled Dave]

Or "The Allies" as Peter knows them, haha

[Rapidrory]

OK, N2HV are FINALLY back in stock; both RS and Farnell kept moving their restock dates back, but I now have some driver chips! Rhys, I believe you are long overdue an N2HV :L

Also, Scott. I still have your N2HV and Deltangs; you never replied to my email about what to do with them..

[Rhys]

Excellent. Can I PayPal you the money at the end of next week? Had to spend all my money on boring grown up things, but I get paid next Friday.

[Roboteernat]

Hiya,

Could i put in an order for one of the N2HV controllers?
If there is enough available for demand could i buy 2, my GF would like to have a go at building one