Bruce

All things small and scratchy.

Moderators: BeligerAnt, petec, administrator

Post Reply
josh
Posts: 1115
Joined: Thu Apr 28, 2005 6:56 pm
Location: Uxbridge, London
Contact:

Post by josh »

if the wires are connected to the centre and one outer terminal on the pot will that not only mean the button only skips from 50% to 100% or 0-50 if the channel is reversed?
RPD International
www.RPDintl.com
User avatar
peterwaller
Posts: 3213
Joined: Fri Feb 15, 2002 12:00 am
Location: Aylesbury Bucks
Contact:

Post by peterwaller »

If the stick is in the middle yes but if you put the stick to one and and the switch connects it to the other end you should get full movement.
User avatar
earthwormjim
Posts: 1190
Joined: Thu Sep 16, 2010 4:57 pm
Location: Secret Undisclosed Moonbase Location

Post by earthwormjim »

Yep,it is easier to move the stick to the full down position,and operate the button from there,as there is no ratchet to keep the stick in the middle. :)
Image
Remote-Controlled Dave
Posts: 3716
Joined: Sun Apr 03, 2005 5:30 pm
Location: Antrim, Northern Ireland
Contact:

Post by Remote-Controlled Dave »

I have no idea what you guys are talking about :D
Die Gracefully Robotics
Winner - AWS 39
haz
Posts: 1855
Joined: Thu Apr 15, 2010 11:20 am
Location: Underwater Lair
Contact:

Post by haz »

welcome to my world....
User avatar
earthwormjim
Posts: 1190
Joined: Thu Sep 16, 2010 4:57 pm
Location: Secret Undisclosed Moonbase Location

Post by earthwormjim »

:lol: :lol:
Image
User avatar
earthwormjim
Posts: 1190
Joined: Thu Sep 16, 2010 4:57 pm
Location: Secret Undisclosed Moonbase Location

Post by earthwormjim »

Finished Bruces controller this morning.
Looks more like a Borg controller,I think!! :o

Image

I have all the bits to finish Bruce,but am waiting for my new soldering iron to arrive (from China),as I am fed up of using my "?2.99 special" from the local pound shop.
It has been "en-route" since 31st Jan. I presume that customs has intercepted it. :(
Hopefully it wont be too much longer.
Cheers Jim
Image
User avatar
earthwormjim
Posts: 1190
Joined: Thu Sep 16, 2010 4:57 pm
Location: Secret Undisclosed Moonbase Location

Post by earthwormjim »

Using my new soldering iron,I have finished wiring up Bruce...

Image

I have also attached the 0.5mm Titanium plate onto the lifter frame...

Image

The only thing I have to do now is sort out the self righting "fin".
:)
(Working great with the E-flite Tx,aswell. :) )
Image
haz
Posts: 1855
Joined: Thu Apr 15, 2010 11:20 am
Location: Underwater Lair
Contact:

Post by haz »

looking great as per usual :D
User avatar
joey_picus
Posts: 1137
Joined: Tue Jan 13, 2009 1:51 pm
Location: Lancaster, Lancashire
Contact:

Post by joey_picus »

Seconded :)
Joey McConnell-Farber - Team Picus Telerobotics - http://picus.org.uk/ - @joey_picus
"These dreams go on when I close my eyes...every second of the night, I live another life"
Post Reply