Roaming Robots Event Aylesbury 22nd May

Andrew_Hibberd · Post by **Andrew_Hibberd** » Sat May 21, 2005 6:06 am

Simon that would be great, I am in Wessex Hall.
Thank You very much

Post by **BeligerAnt** » Sat May 21, 2005 1:06 pm

AntLifter's gearbox still has an intermittant problem, but it seems to work more often than not, so we'll go with it tomorrow and see what happens.

I have made up some small cards as follows:

Antweight robots weigh 150g and
must fit into a 4? (10cm) cube.
For further information, please visit:
www.antweights.com,
www.antworldseries.tk,
and the antweight forum at:
www.robotwars101.org/phpBB/
Thank you for your interest.

If you want to print some of your own, I used Word's label facility to print a sheet of Avery L7160 labels (onto plain paper). This gives 21 labels per A4 sheet, each label being approx 6.3 x 3.8 cm.

Simon Windisch · Post by **Simon Windisch** » Sun May 22, 2005 4:14 pm

OK, that was fun, and nice to see some new faces. Let's hope we see some more after today.

Simon

Andrew_Hibberd · Post by **Andrew_Hibberd** » Sun May 22, 2005 5:01 pm

got a page with pictures on it

http://www.freewebs.com/anticide_events ... grobot.htm

Post by **BeligerAnt** » Sun May 22, 2005 8:59 pm

Here are the results:
http://homepage.ntlworld.com/g0xan/robo ... esults.htm

Any errors, omissions or typo's are entirely my fault and the result of a long day!

I thought it was a good day. We certainly had some keen ant-fans by the end of the afternoon, and hopefully a few new ant builders in the near future!

(PeteC - we will have to start negotiating commission rates if we give out many more plugs for the RW101 shop!

)

Post by **petec** » Mon May 23, 2005 6:56 pm

You are welcome to 10% Gary - I think that works out about ?1 per year

Post by **BeligerAnt** » Mon May 23, 2005 9:04 pm

OK, I'll donate my cut to the RW101 forum fund! 8)