starting
Moderators: BeligerAnt, petec, administrator
ewan, nope lol did it at james coopers workshop but dave gave us a bit of a hand with it
leo, no to heavy its 2mm mild steel
leo, no to heavy its 2mm mild steel
RPD International
www.RPDintl.com
www.RPDintl.com
i didnt kno there was 2mm hardox if i did i would get that but i got this free from a sponsor so thought i may as well use it
RPD International
www.RPDintl.com
www.RPDintl.com
Some of you have already seen it in Reading as it was under construction, and at AWS21 only the discs were there, but now I present to you the finished Raptor-weight:
Just over 4,5kg with everything attached. Many thanks to Dennis and Tim who helped me out with this project. I'm very pleased with the outcome.
Some specs:
3 Graupner SPEED 700 TURBO C 9,6 V (18A nominal 120A stall @ 9,6V)
3 RC-Smart 6-12V speed controllers 100A fwd/60A rev
9,6V IB4200 Nimh pack (might be swapped for a Lithium pack in future)
Spekrum DX6 and BR6000 RX/TX
High Density Polyethylene and Titanium armour
Modified Serpent RC car wheels
Now on to the Feather, light, middle and heavy version.
Just over 4,5kg with everything attached. Many thanks to Dennis and Tim who helped me out with this project. I'm very pleased with the outcome.
Some specs:
3 Graupner SPEED 700 TURBO C 9,6 V (18A nominal 120A stall @ 9,6V)
3 RC-Smart 6-12V speed controllers 100A fwd/60A rev
9,6V IB4200 Nimh pack (might be swapped for a Lithium pack in future)
Spekrum DX6 and BR6000 RX/TX
High Density Polyethylene and Titanium armour
Modified Serpent RC car wheels
Now on to the Feather, light, middle and heavy version.
Last edited by leo-rcc on Sat Feb 10, 2007 7:21 pm, edited 1 time in total.
-
- Posts: 308
- Joined: Sat Jul 19, 2003 12:00 am
- Location: Netherlands