Heavy Duty Wheelchair Available

Places to spend cash or learn things!

Moderators: petec, administrator, BeligerAnt

mickm
Posts: 2
Joined: Fri Sep 16, 2011 6:20 pm

Heavy Duty Wheelchair Available

Postby mickm » Fri Oct 07, 2011 1:01 pm

Hi All, Sorry if this is the wrong place as I am new. As a volunteer with an engineering charity who help the handicapped I have a HD wheelchair with a degree of off road ability. It was designed and built by a LandRover Engineer for his daughter. Its all complete but it was stored in a damp garage and the batteries will be u/s for cartain.
The chair is no longer needed for the project intended and is free to a good home. But a suitable modest donation to the charity would be appreciated.
It obviously needs collecting from near Norwich with its charger, car hoist and one or two other bits.
If anyone is interested ask me what tech details you need to know.

User avatar
Jonny
Posts: 532
Joined: Mon Aug 30, 2010 8:18 pm
Location: Reigate
Contact:

Re: Heavy Duty Wheelchair Available

Postby Jonny » Fri Oct 07, 2011 2:35 pm

Hi I'm interested. Could you please post some pictures? Do you have any info on the motors?
Image

mickm
Posts: 2
Joined: Fri Sep 16, 2011 6:20 pm

Re: Heavy Duty Wheelchair Available

Postby mickm » Tue Oct 18, 2011 4:47 pm

Hi jonny, sorry for delay. Motor info; Bison Gear and Engineering Corp. Pt No. 081-800-0020. Gear Ratio 20:1. O/P Speed 90rpm. Torque 20N-m. Ambient Temp 40 C.
Motor Watts 375. Motor Volts 24VDC. Enclosure TENV. Motor RPM 1800. Duty Cont. Form factor 1.0. Motor hp 0.5. Motor Current 38.5 ADC.

Hope this is OK. At the moment I have not worked out how to down load pics to this site, can you have given me your email? I will check the pics situation after posting this.

User avatar
Jonny
Posts: 532
Joined: Mon Aug 30, 2010 8:18 pm
Location: Reigate
Contact:

Re: Heavy Duty Wheelchair Available

Postby Jonny » Thu Oct 20, 2011 7:43 pm

thanks, you can email me at: jonny.adam.uk@googlemail.com
Image


Return to “Resource Websites”

Who is online

Users browsing this forum: No registered users and 1 guest