new < 1g dsm2 compatible rx's!!!
Moderators: BeligerAnt, petec, administrator
- earthwormjim
- Posts: 1190
- Joined: Thu Sep 16, 2010 4:57 pm
- Location: Secret Undisclosed Moonbase Location
Re: new < 1g dsm2 compatible rx's!!!
Mine arrived yesterday.
Here is a comparison pic next to an orange 4ch hobyking rx...
This thing is absolutely tiny.
Here is a comparison pic next to an orange 4ch hobyking rx...
This thing is absolutely tiny.
- bitternboy
- Posts: 759
- Joined: Sat Jun 06, 2009 7:36 pm
- Location: Sheffield
Re: new < 1g dsm2 compatible rx's!!!
That's rediculous...
Jonathan Atkinson
Before you criticize another person, first walk a mile in their shoes. Then, when you critisize them, you'll be a mile away and have their shoes.
Before you criticize another person, first walk a mile in their shoes. Then, when you critisize them, you'll be a mile away and have their shoes.
-
- Posts: 1134
- Joined: Tue Jan 20, 2004 12:00 am
- Location: London
- Contact:
Re: new < 1g dsm2 compatible rx's!!!
I need to find some way to go between the pads on the micro RX to standard 0.1" headers anyone got any ideas?
TEAM GEEK!
Re: new < 1g dsm2 compatible rx's!!!
how would one attach the servo cables to that..thing?
Philip Johansson ,16
one of the guys from Sweden.
Robots: Breeze (Aw, not done yet )
one of the guys from Sweden.
Robots: Breeze (Aw, not done yet )
- earthwormjim
- Posts: 1190
- Joined: Thu Sep 16, 2010 4:57 pm
- Location: Secret Undisclosed Moonbase Location
Re: new < 1g dsm2 compatible rx's!!!
I was just contemplating the same thing.philippos wrote:how would one attach the servo cables to that..thing?
Re: new < 1g dsm2 compatible rx's!!!
It appears that two of the holes are + and - power and the other four are where the signal lead from the servo would go.
So lots of cutting, wire stripping and soldering
So lots of cutting, wire stripping and soldering
Team Imperial - What is that, metric?
Re: new < 1g dsm2 compatible rx's!!!
cheers jim
Philip Johansson ,16
one of the guys from Sweden.
Robots: Breeze (Aw, not done yet )
one of the guys from Sweden.
Robots: Breeze (Aw, not done yet )
- earthwormjim
- Posts: 1190
- Joined: Thu Sep 16, 2010 4:57 pm
- Location: Secret Undisclosed Moonbase Location
Re: new < 1g dsm2 compatible rx's!!!
heres another attempt to show just how small these are...
It does come with a data sheet.
It does come with a data sheet.
Last edited by earthwormjim on Wed Jul 20, 2011 1:37 pm, edited 1 time in total.
Re: new < 1g dsm2 compatible rx's!!!
again, how on earth do you hook it up?
Philip Johansson ,16
one of the guys from Sweden.
Robots: Breeze (Aw, not done yet )
one of the guys from Sweden.
Robots: Breeze (Aw, not done yet )
- earthwormjim
- Posts: 1190
- Joined: Thu Sep 16, 2010 4:57 pm
- Location: Secret Undisclosed Moonbase Location
Re: new < 1g dsm2 compatible rx's!!!
A steady hand,a small soldering iron,and a big magnifying glass!!philippos wrote:again, how on earth do you hook it up?