I would be interested Jonny, what grade have you got? Could you also send me a PM with costs?
Thanks
+++TITANIUM+++
Moderators: BeligerAnt, petec, administrator
-
- Posts: 1134
- Joined: Tue Jan 20, 2004 12:00 am
- Location: London
- Contact:
Re: +++TITANIUM+++
TEAM GEEK!
Re: +++TITANIUM+++
it's grade 2, lightly scratched. unfortunately there's a couple of 4mm holes on the 17 by 8 peice i have. if i cut the 14 by 5 out there'd be a minimum of 1 hole 9.5cm in 1.5cm down. Is that ok? i can cut out more or less if you want.
![Image](http://i990.photobucket.com/albums/af23/Jonny_Adam/signaturepng.png)
-
- Posts: 1134
- Joined: Tue Jan 20, 2004 12:00 am
- Location: London
- Contact:
Re: +++TITANIUM+++
I am making a couple of 90 degree parts to cover the front of my new bot. Will you be using the Ti before the AWS? I could cut out what I need and give the rest back to you at the aws.
TEAM GEEK!
Re: +++TITANIUM+++
you can have a 15cm by 8.5cm piece for a fiver. it's a very rough piece with a 8.5by 15cm square marked in the middle. unfortunately my wilko tin snips won't cut ti this thick anymore so i wasn't able to cut out the square.
![Image](http://i990.photobucket.com/albums/af23/Jonny_Adam/signaturepng.png)