Needed: 38swg Enamelled Copper Wire

[thebeardedone]

Hi,

I am going to make a joule thief and so I am after a few metres of 38swg enamelled copper wire to make mini transformer. I thought I would try here before I went out a brought the full reel when I only require a small amount.

Any help would be appreciated,
Sam

[slurp]

I've got some 0.18mm, it's about 1/2 way between 36 & 37 swg.

Is that any good to you?

regards,
colin

[thebeardedone]

I've got some 0.18mm, it's about 1/2 way between 36 & 37 swg.

Is that any good to you?

regards,
colin

That would be perfect, Colin. I'll just use a slightly larger ferrite bead to make the transformer.

Do you require any costs?

Regards,
Sam

[slurp]

That would be perfect, Colin. I'll just use a slightly larger ferrite bead to make the transformer.

Do you require any costs?

A short report and some pics for minisumo.org.uk from Robot Challenge?!?

Good Luck!

[thebeardedone]

That would be perfect, Colin. I'll just use a slightly larger ferrite bead to make the transformer.

Do you require any costs?

A short report and some pics for minisumo.org.uk from Robot Challenge?!?

Good Luck!

Aha! Long story there ...

Basically, I booked the trip with my partner but we split up a few weeks before the flight, so she insisted that I take myself off the flight names so that she could take someone else. We are back together now but the damage had already been done so here I am in "sunny" Kent whilst she is in Vienna.

Bitterly, bitterly disappointed, to be honest.

[slurp]

so here I am in "sunny" Kent whilst she is in Vienna.

On the plus side you'll have some wire in the post, I've still got your address somewhere.

You can look forward to the next UK event.

regards,
Colin