Another New Nanoweight...
Moderators: BeligerAnt, petec, administrator
- peterwaller
- Posts: 3213
- Joined: Fri Feb 15, 2002 12:00 am
- Location: Aylesbury Bucks
- Contact:
Re: Another New Nanoweight...
Having finished modifying Mutant, Deflea and 10 -9 and redesigning Fleabite and 1 Billionth I am now ready to try these double motor gearbox units out.
Not sure what form the robot will take or which weight class it will be but the only way I can add a 4th robot to my Flea or Nano team is a walker or cluster so it could be a bit of a challenge.
Not sure what form the robot will take or which weight class it will be but the only way I can add a 4th robot to my Flea or Nano team is a walker or cluster so it could be a bit of a challenge.
Re: Another New Nanoweight...
Pleeease make a walker :L Your latest engineering projects have been beautiful; I definitely want to see a walker on your team :L
Rory Mangles - Team Nuts
Robots: Nuts 2 and many more...
NanoTwo Motor Controllers: https://nutsandbots.co.uk/product/nanotwodualesc
Robots: Nuts 2 and many more...
NanoTwo Motor Controllers: https://nutsandbots.co.uk/product/nanotwodualesc
- peterwaller
- Posts: 3213
- Joined: Fri Feb 15, 2002 12:00 am
- Location: Aylesbury Bucks
- Contact:
Re: Another New Nanoweight...
It would certainly be a challenge at nano weight I need to have a think about that.
Just off bowling now my wife, daughter and two grandaughters are taking me out as it is my 68th birthday and its friday the 13th.
Just off bowling now my wife, daughter and two grandaughters are taking me out as it is my 68th birthday and its friday the 13th.
Re: Another New Nanoweight...
Ah, Happy Birthday Hehe, well it's my 21st tomorrow and I'm spending most of it helping out with an open day
Rory Mangles - Team Nuts
Robots: Nuts 2 and many more...
NanoTwo Motor Controllers: https://nutsandbots.co.uk/product/nanotwodualesc
Robots: Nuts 2 and many more...
NanoTwo Motor Controllers: https://nutsandbots.co.uk/product/nanotwodualesc
-
- Posts: 441
- Joined: Mon Mar 03, 2014 7:01 pm
Re: Another New Nanoweight...
Happy birthday Pete and happy birthday for tomorrow Rory!
I like the look of those drive units; I purchased some on eBay and they look like they should be fantastic! I'm hoping to power a nano with them and some TG9z servo boards and hopefully I shall build a flea out of them too. Do you reckon I could get away with using a single TG9z servo board to power two of those motors per side so I can have a 4 wheel drive system or will that not work? I've always wanted to build a 4WD pusher!
I like the look of those drive units; I purchased some on eBay and they look like they should be fantastic! I'm hoping to power a nano with them and some TG9z servo boards and hopefully I shall build a flea out of them too. Do you reckon I could get away with using a single TG9z servo board to power two of those motors per side so I can have a 4 wheel drive system or will that not work? I've always wanted to build a 4WD pusher!
Re: Another New Nanoweight...
happy birthday pete. I'm looking into building a nanoweight. do these drive units require any modification? (i may have missed someone saying whether they do or not.)
Re: Another New Nanoweight...
It probably would work. Those drive units are pretty power hungry (0.8A stall), so it might be pushing it, but worth a shot at least... I'm also looking to use them in a 4WD flea to make a fleaweight Bulldozer :L
They don't need any modification, but you can cut them in half to get a wider wheel base.
In other news it turns out it's not that hard to make a Nanoweight walker... Making a good one however probably is
After Pete mentioning he might make a Nano walker, it got me thinking about it, and this is the result..
It's called Scampi and is very silly :L
Control is debateable; you have what resembles forwards and steering (reverse just isn't a thing), but it's more just wild flailings in a general direction. It would have been better to use hacked servos as the drive units are much too fast. The linkage is based off the one Dan is using for his walker. It fits in the cube and even with a 180mAh battery (I'm awaiting a batch of Nano batteries) it still only weighs 22g..
They don't need any modification, but you can cut them in half to get a wider wheel base.
In other news it turns out it's not that hard to make a Nanoweight walker... Making a good one however probably is
After Pete mentioning he might make a Nano walker, it got me thinking about it, and this is the result..
It's called Scampi and is very silly :L
Control is debateable; you have what resembles forwards and steering (reverse just isn't a thing), but it's more just wild flailings in a general direction. It would have been better to use hacked servos as the drive units are much too fast. The linkage is based off the one Dan is using for his walker. It fits in the cube and even with a 180mAh battery (I'm awaiting a batch of Nano batteries) it still only weighs 22g..
Rory Mangles - Team Nuts
Robots: Nuts 2 and many more...
NanoTwo Motor Controllers: https://nutsandbots.co.uk/product/nanotwodualesc
Robots: Nuts 2 and many more...
NanoTwo Motor Controllers: https://nutsandbots.co.uk/product/nanotwodualesc
-
- Posts: 433
- Joined: Sun Nov 30, 2014 9:34 pm
- Location: Stroud,Gloucestershire
Re: Another New Nanoweight...
If it classes as a Walker then not only is it a first but you also have 15g.(please please please makin it a spinner just for the craziness of it all)
Team Badger
Has a 3d printer now yay
-£4.82+VAT (intact)
-cool modulated printed thingy
-not yet built nasty mean spinnt thingy
I'm gonna build something huge and stupid, try and stop me
Has a 3d printer now yay
-£4.82+VAT (intact)
-cool modulated printed thingy
-not yet built nasty mean spinnt thingy
I'm gonna build something huge and stupid, try and stop me
Re: Another New Nanoweight...
I thought about adding a weapon to it while I was building it (It would have been a big servo flipper) but after I tested it I quickly decided it wasn't worth it If I manage to make a better one at some point then I will add a big weapon.
Here's a video: https://www.youtube.com/watch?v=fIiZU6o ... e=youtu.be
Here's a video: https://www.youtube.com/watch?v=fIiZU6o ... e=youtu.be
Rory Mangles - Team Nuts
Robots: Nuts 2 and many more...
NanoTwo Motor Controllers: https://nutsandbots.co.uk/product/nanotwodualesc
Robots: Nuts 2 and many more...
NanoTwo Motor Controllers: https://nutsandbots.co.uk/product/nanotwodualesc
-
- Posts: 3716
- Joined: Sun Apr 03, 2005 5:30 pm
- Location: Antrim, Northern Ireland
- Contact: