Peter Waller Nano Adventures

[Rapidrory]

Have you tried hitting anything with it yet? My limited experience with nano horizontal spinners is that they go crazy as soon as they hit anything :L

[peterwaller]

Not yet I have to mold some tyres first and add a receiver/controller but the lack of weight is going to be a problem.

[Remote-Controlled Dave]

You say problem, I say entertainment.

I'm going to guess at the name Nanobite, Peter?

[razerdave]

Nibblit

[peterwaller]

All finished bar sharpening the blade and only just over weight.


It is not such a handfull with the spinner going as I had feared but it can get out of control even hitting 3.6 gm chassis.
http://youtu.be/5yGo5EXVgzk

[Remote-Controlled Dave]

That's great

[Hogi]

cool! nice one Peter!

[peterwaller]

It wasn't quite as finished as I first thought I hadn't tested it inverted.
The ty-wrap on the battery which I added as an after thought stopped both wheels touching the ground at the same time so I double sided taped the batteries in.
The shaft on the brushless motor wasn't quite long enough to stop the blade touching the deck so I added a blob of epoxy to it.
Finally I shaped the end of the blades it is now 0.2 gms under weight.

[peterwaller]

Couldn't come up with anything mind blowingly original so they are:
Spinner : ONE BILLIONTH U.S. STYLE
Lifter: TEN TO THE MINUS NINE

[Remote-Controlled Dave]

Ladies and gentlemen, Peter's greatest ever names.