Controller stuffs

Please post all questions and answers in here. This way people can easily see if someone else has the same problem.

Moderators: BeligerAnt, petec, administrator

Post Reply
User avatar
TeamScrewUp
Posts: 122
Joined: Mon Oct 02, 2017 6:26 am

Controller stuffs

Post by TeamScrewUp »

Hey everyone. I'm just wondering if the Devention Devo 7E can have multiple receivers connected to it.
Daaa
Manta ray (2WD wedge bot)
Nom (Grabber)
Arena Sweeper (Undercutter)
FORCE WALL (Front-hinged Flipper)
User avatar
Shakey
Posts: 1119
Joined: Sat Mar 13, 2010 8:38 pm
Location: Reading

Re: Controller stuffs

Post by Shakey »

It can indeed! This page has a section on how to change the model/profile for the Devo. https://nutsandbots.co.uk/devo7e/ Then you just bind each bot to a separate profile.

Unless you mean control multiple receivers all at once rather than one at a time, in which case put all the receivers into bind mode at once then bind normally.
Nuts And Bots - For all your components and ready built antweights!

Alex Shakespeare - Team Shakey / Nuts And Bots / Team Nuts:
AWS 44, 45, 49, 51 & 55 Winner - Far too many robots!
User avatar
TeamScrewUp
Posts: 122
Joined: Mon Oct 02, 2017 6:26 am

Re: Controller stuffs

Post by TeamScrewUp »

Thanks for the help. All at once would be... something. To say the least
Daaa
Manta ray (2WD wedge bot)
Nom (Grabber)
Arena Sweeper (Undercutter)
FORCE WALL (Front-hinged Flipper)
User avatar
TeamScrewUp
Posts: 122
Joined: Mon Oct 02, 2017 6:26 am

Re: Controller stuffs

Post by TeamScrewUp »

Shakey wrote: Fri Sep 28, 2018 6:30 am It can indeed! This page has a section on how to change the model/profile for the Devo. https://nutsandbots.co.uk/devo7e/ Then you just bind each bot to a separate profile.

Unless you mean control multiple receivers all at once rather than one at a time, in which case put all the receivers into bind mode at once then bind normally.
Wondering as well if the SG90 is ok to plug into the nano two. Sorry about the questions. I just want to be safe with not breaking it.
Daaa
Manta ray (2WD wedge bot)
Nom (Grabber)
Arena Sweeper (Undercutter)
FORCE WALL (Front-hinged Flipper)
User avatar
Shakey
Posts: 1119
Joined: Sat Mar 13, 2010 8:38 pm
Location: Reading

Re: Controller stuffs

Post by Shakey »

TeamScrewUp wrote: Wed Oct 03, 2018 6:05 am Wondering as well if the SG90 is ok to plug into the nano two. Sorry about the questions. I just want to be safe with not breaking it.
The Nanotwo v3 outputs whatever your battery voltage is to the servo. If you are using a 2s LiPo a sg90 wouldn't live long.

As a side note it wouldn't live long anyway, it is afterall an sg90 :P
Nuts And Bots - For all your components and ready built antweights!

Alex Shakespeare - Team Shakey / Nuts And Bots / Team Nuts:
AWS 44, 45, 49, 51 & 55 Winner - Far too many robots!
User avatar
TeamScrewUp
Posts: 122
Joined: Mon Oct 02, 2017 6:26 am

Re: Controller stuffs

Post by TeamScrewUp »

True. Want to go cheap though for now. Just to see if it'll work long.
Daaa
Manta ray (2WD wedge bot)
Nom (Grabber)
Arena Sweeper (Undercutter)
FORCE WALL (Front-hinged Flipper)
Post Reply