Help for a big event

Please post all questions and answers in here. This way people can easily see if someone else has the same problem.

Moderators: BeligerAnt, petec, administrator

razerdave
Posts: 1562
Joined: Mon Jan 02, 2006 9:40 pm
Location: Carterton, Oxfordshire
Contact:

Re: Help for a big event

Post by razerdave »

I love the spinner one, but whats going on with the flipper one ? The servo sticks out and the flipper is on the Pisa :P
User avatar
Team Orr
Posts: 832
Joined: Thu Jan 03, 2008 3:09 pm
Location: London/Bath
Contact:

Re: Help for a big event

Post by Team Orr »

True, there are some issues. the armour may need a reprint along the line to make it thicker etc. There was no way that servo was sitting in the robot with the design we have, its a trend i've seen quite a bit recently. Josh did a cracking job, when you see them up close at some point you should be able to see that :)

Oh and just an FYI, the event got pushed back to January because of booking issues but apart from that everything looks good :) Will hopefully be popping down to an event next year, been far too long.
"if it wasn't for Edison we'd be watching TV by candlelight"
Jack Orr
Team Orr Robotics
haz
Posts: 1855
Joined: Thu Apr 15, 2010 11:20 am
Location: Underwater Lair
Contact:

Re: Help for a big event

Post by haz »

looking rather cool indeed.
Post Reply