TeamScrewUps poopoo bots
Moderators: BeligerAnt, petec, administrator
- TeamScrewUp
- Posts: 122
- Joined: Mon Oct 02, 2017 6:26 am
Re: TeamScrewUps poopoo bots
Lastly, are a bunch of planned builds
Weather these will come to life or not are in the air, but for now i am putting them here:
SD (Vertical Spinner)
Psychosis & Psycho-Sis (seperate bots, overhead spinners)
Tiny Turtle (Angled Spinner)
Unnamed bot (To be named) (overhead drillbot)
ERBO... (pusher)
Uh Oh... (Rammer)
Questionable Consciousness (Drum Spinner)
Some of these may be built, some of them may not even get past being an idea. But for now i'll place them here for if and when i am finished with the current 3 bots and want to build something else
Weather these will come to life or not are in the air, but for now i am putting them here:
SD (Vertical Spinner)
Psychosis & Psycho-Sis (seperate bots, overhead spinners)
Tiny Turtle (Angled Spinner)
Unnamed bot (To be named) (overhead drillbot)
ERBO... (pusher)
Uh Oh... (Rammer)
Questionable Consciousness (Drum Spinner)
Some of these may be built, some of them may not even get past being an idea. But for now i'll place them here for if and when i am finished with the current 3 bots and want to build something else
Last edited by TeamScrewUp on Sat Jul 31, 2021 2:19 pm, edited 4 times in total.
Daaa
Manta ray (2WD wedge bot)
Nom (Grabber)
Arena Sweeper (Undercutter)
FORCE WALL (Front-hinged Flipper)
Manta ray (2WD wedge bot)
Nom (Grabber)
Arena Sweeper (Undercutter)
FORCE WALL (Front-hinged Flipper)
- TeamScrewUp
- Posts: 122
- Joined: Mon Oct 02, 2017 6:26 am
Re: TeamScrewUps poopoo bots
That's all for the big update. Way too long since i put anything here.
Daaa
Manta ray (2WD wedge bot)
Nom (Grabber)
Arena Sweeper (Undercutter)
FORCE WALL (Front-hinged Flipper)
Manta ray (2WD wedge bot)
Nom (Grabber)
Arena Sweeper (Undercutter)
FORCE WALL (Front-hinged Flipper)
- TeamScrewUp
- Posts: 122
- Joined: Mon Oct 02, 2017 6:26 am
Re: TeamScrewUps poopoo bots
Arena Sweeper is finally complete, which means i can make a start now on my next bot, Rigormortis. This will be a 2wd beater bar spinner. Pictures of both Arena Sweeper and Rigormortis tomorrow but for now, this is how my team is looking in terms of bots:
https://gyazo.com/d0548f8aa1ef1894114a105a34dbaf18
https://gyazo.com/c666bbbfe20007724d7153367f8d673c
The bots crossed out are the ones i have ready to run right now. All the others are planned builds that i will be doing, but i'm focusing on them one at a time
And as for Krave-Lit... not sure. It weighed 90g~ at AWS 57. Which is impressively low. Maybe expect one with a lot more metal next time? Who knows.
https://gyazo.com/d0548f8aa1ef1894114a105a34dbaf18
https://gyazo.com/c666bbbfe20007724d7153367f8d673c
The bots crossed out are the ones i have ready to run right now. All the others are planned builds that i will be doing, but i'm focusing on them one at a time
And as for Krave-Lit... not sure. It weighed 90g~ at AWS 57. Which is impressively low. Maybe expect one with a lot more metal next time? Who knows.
Daaa
Manta ray (2WD wedge bot)
Nom (Grabber)
Arena Sweeper (Undercutter)
FORCE WALL (Front-hinged Flipper)
Manta ray (2WD wedge bot)
Nom (Grabber)
Arena Sweeper (Undercutter)
FORCE WALL (Front-hinged Flipper)
- TeamScrewUp
- Posts: 122
- Joined: Mon Oct 02, 2017 6:26 am
Re: TeamScrewUps poopoo bots
Here is my new robot, Arena Sweeper!
Currently using a 1 toothed disc supplied by Sev (also big thank you for the weapon soldering). But soon will have 2 custom weapons, a disc and a bar. But in the meantime its just the disc.
https://gyazo.com/cd86909ad2af73a7afdd315dd6d2f026
https://gyazo.com/101756bc29e065aef23843e4d68bd14a
Super excited to get the custom weapons cut, hopefully it will still be in weight but if not then no worries. Next bot to do is Rigormortis...
Currently using a 1 toothed disc supplied by Sev (also big thank you for the weapon soldering). But soon will have 2 custom weapons, a disc and a bar. But in the meantime its just the disc.
https://gyazo.com/cd86909ad2af73a7afdd315dd6d2f026
https://gyazo.com/101756bc29e065aef23843e4d68bd14a
Super excited to get the custom weapons cut, hopefully it will still be in weight but if not then no worries. Next bot to do is Rigormortis...
Daaa
Manta ray (2WD wedge bot)
Nom (Grabber)
Arena Sweeper (Undercutter)
FORCE WALL (Front-hinged Flipper)
Manta ray (2WD wedge bot)
Nom (Grabber)
Arena Sweeper (Undercutter)
FORCE WALL (Front-hinged Flipper)
Re: TeamScrewUps poopoo bots
Does that just ride on the bolt heads? Must be a nightmare to drive if so.
For my stuff:
http://bodgeitandhope.blogspot.co.uk/
http://bodgeitandhope.blogspot.co.uk/
- peterwaller
- Posts: 3213
- Joined: Fri Feb 15, 2002 12:00 am
- Location: Aylesbury Bucks
- Contact:
Re: TeamScrewUps poopoo bots
I used to epoxy a small ball bearing to the end of the shaft so it ran smoothly. <img src="https://db5pap001files.storage.live.com ... pmode=none" width="1115" height="836" />
- TeamScrewUp
- Posts: 122
- Joined: Mon Oct 02, 2017 6:26 am
Re: TeamScrewUps poopoo bots
Yes and it is a nightmare to drive.
Daaa
Manta ray (2WD wedge bot)
Nom (Grabber)
Arena Sweeper (Undercutter)
FORCE WALL (Front-hinged Flipper)
Manta ray (2WD wedge bot)
Nom (Grabber)
Arena Sweeper (Undercutter)
FORCE WALL (Front-hinged Flipper)
- TeamScrewUp
- Posts: 122
- Joined: Mon Oct 02, 2017 6:26 am
Re: TeamScrewUps poopoo bots
I'll probably do that then, good ideapeterwaller wrote: ↑Sun Aug 22, 2021 6:29 pm I used to epoxy a small ball bearing to the end of the shaft so it ran smoothly. <img src="https://db5pap001files.storage.live.com ... pmode=none" width="1115" height="836" />
Daaa
Manta ray (2WD wedge bot)
Nom (Grabber)
Arena Sweeper (Undercutter)
FORCE WALL (Front-hinged Flipper)
Manta ray (2WD wedge bot)
Nom (Grabber)
Arena Sweeper (Undercutter)
FORCE WALL (Front-hinged Flipper)
-
- Posts: 190
- Joined: Mon Jul 30, 2018 1:22 pm
- Location: Kent
Re: TeamScrewUps poopoo bots
I print a small domed disk with a hole in the middle, sized to hold a small ball bearing, like this (from memory, I think that's a 3mm steel ball):
Needs some experimentation to get the dimensions right but when you do, it's smoooooth
Needs some experimentation to get the dimensions right but when you do, it's smoooooth
Stuart (Tony's dad)
Re: TeamScrewUps poopoo bots
Perfect solution there ^^
For my stuff:
http://bodgeitandhope.blogspot.co.uk/
http://bodgeitandhope.blogspot.co.uk/