New Robots

Flippt · Post by **Flippt** » Wed Dec 13, 2006 2:09 pm

But how do you get the legs in the cam?

When I tried, I had to make two diffrent cams, with tapped hole and some M2 screws.

peterwaller · Post by **peterwaller** » Wed Dec 13, 2006 2:53 pm

The legs have a slot through the mounting hole so they can be flexed over the crankshaft ends see drawing below.

Andrew_Hibberd · Post by **Andrew_Hibberd** » Wed Dec 13, 2006 2:54 pm

Last time i looked Pete had a long thin slot and bent the legs onto the cam.

http://www.antweight.co.uk/results/ws21 ... CF1338.jpg

you can just make it out there. Pete beat me to the post

razerdave · Post by **razerdave** » Wed Dec 13, 2006 8:48 pm

Would it be possible for you to make another set for my walker ? I don't have access to a lathe and such, but I want to make a shufflebot walker (it's going to be a reincarnation of my failed SAW Stewie)

Cavecrusher · Post by **Cavecrusher** » Fri Dec 22, 2006 12:59 pm

i present MBY (r)evolution

http://home.hccnet.nl/h.bouwens/DSC00317.JPG

still work in progress, will be ready for AWS22

Flippt · Post by **Flippt** » Fri Dec 22, 2006 2:22 pm

Is it just me, are we getting alot more FBS back in action?

Btw Tim, MBY looks awsome. What is the shell made of?

Cavecrusher · Post by **Cavecrusher** » Fri Dec 22, 2006 2:25 pm

2024 aluminium

leo-rcc · Post by **leo-rcc** » Fri Dec 22, 2006 2:39 pm

looks massive. I imagine a lot of saving left to do on that shell.

Cavecrusher · Post by **Cavecrusher** » Fri Dec 22, 2006 3:03 pm

currently it's 112 gr, need to get it down to 85

Remote-Controlled Dave · Fri Dec 22, 2006 3:41 pm

Mmmmmm...MBY Revolution......

Hopefully at AWS22, two of the FBS's will have to fight each other...that would interest me. There'd be a big bang and a judges decision as both fly out in different directions. lol.

Also I'd love to see DBA vs Katjuscha...