Team Coolspeedbot's robot builds
Moderators: BeligerAnt, petec, administrator
-
- Posts: 441
- Joined: Mon Mar 03, 2014 7:01 pm
Re: Team Coolspeedbot's robot builds
I reckon that if you are getting the power for the servo from the receiver, then the servo is only running on the regulated +5V from the NanoTwo.
What I believe you should do is connect the servo power leads directly to the battery in parallel with the NanoTwo controller to give it the full LiPo voltage it needs.
Hope that works for you. Fantastic looking machine.
What I believe you should do is connect the servo power leads directly to the battery in parallel with the NanoTwo controller to give it the full LiPo voltage it needs.
Hope that works for you. Fantastic looking machine.
Re: Team Coolspeedbot's robot builds
As antroboteer mentions you're missing a ton of power by not having the red wire from the servo directly connected to the LiPo (The black can stay on the nano two, that doesn't matter).
Nuts And Bots - For all your components and ready built antweights!
Alex Shakespeare - Team Shakey / Nuts And Bots / Team Nuts:
AWS 44, 45, 49, 51 & 55 Winner - Far too many robots!
Alex Shakespeare - Team Shakey / Nuts And Bots / Team Nuts:
AWS 44, 45, 49, 51 & 55 Winner - Far too many robots!
- coolspeedbot
- Posts: 260
- Joined: Sun Jul 26, 2015 4:24 pm
- Location: Dover, Kent
- Contact:
Re: Team Coolspeedbot's robot builds
Oh I see, totally forgot that the receiver is only getting 5 volts. Thanks for the help guys.
If possible could someone show me how they approached this with their own bots just I have a rough idea of what it should look like.
If possible could someone show me how they approached this with their own bots just I have a rough idea of what it should look like.
James Booth
Team Coolspeedbot
Antweights:
Killer-Wolf (2.0), Bunny-Ears (1.5), Blue-Terror (CAD).
Featherweights:
CSB 1 (retired) CSB 2 (under construction).
Team Coolspeedbot
Antweights:
Killer-Wolf (2.0), Bunny-Ears (1.5), Blue-Terror (CAD).
Featherweights:
CSB 1 (retired) CSB 2 (under construction).
Re: Team Coolspeedbot's robot builds
I was making this earlier for unrelated reasons, might be helpful to you.
Nuts And Bots - For all your components and ready built antweights!
Alex Shakespeare - Team Shakey / Nuts And Bots / Team Nuts:
AWS 44, 45, 49, 51 & 55 Winner - Far too many robots!
Alex Shakespeare - Team Shakey / Nuts And Bots / Team Nuts:
AWS 44, 45, 49, 51 & 55 Winner - Far too many robots!
- coolspeedbot
- Posts: 260
- Joined: Sun Jul 26, 2015 4:24 pm
- Location: Dover, Kent
- Contact:
Re: Team Coolspeedbot's robot builds
thats very helpful, thanks
James Booth
Team Coolspeedbot
Antweights:
Killer-Wolf (2.0), Bunny-Ears (1.5), Blue-Terror (CAD).
Featherweights:
CSB 1 (retired) CSB 2 (under construction).
Team Coolspeedbot
Antweights:
Killer-Wolf (2.0), Bunny-Ears (1.5), Blue-Terror (CAD).
Featherweights:
CSB 1 (retired) CSB 2 (under construction).
- coolspeedbot
- Posts: 260
- Joined: Sun Jul 26, 2015 4:24 pm
- Location: Dover, Kent
- Contact:
Re: Team Coolspeedbot's robot builds
Made new bases for Bunny-Ears and Killer-Wolf and heres Killer-wolf's...
thats not good is it? Guess I got some weight shedding ahead but I'll hold off on that until I've looked at alternative materials.
Might work on making 3D models to test ideas.
thats not good is it? Guess I got some weight shedding ahead but I'll hold off on that until I've looked at alternative materials.
Might work on making 3D models to test ideas.
James Booth
Team Coolspeedbot
Antweights:
Killer-Wolf (2.0), Bunny-Ears (1.5), Blue-Terror (CAD).
Featherweights:
CSB 1 (retired) CSB 2 (under construction).
Team Coolspeedbot
Antweights:
Killer-Wolf (2.0), Bunny-Ears (1.5), Blue-Terror (CAD).
Featherweights:
CSB 1 (retired) CSB 2 (under construction).
- coolspeedbot
- Posts: 260
- Joined: Sun Jul 26, 2015 4:24 pm
- Location: Dover, Kent
- Contact:
Re: Team Coolspeedbot's robot builds
Some 3D models of Killer-Wolf.
and a arena one too.
and a arena one too.
James Booth
Team Coolspeedbot
Antweights:
Killer-Wolf (2.0), Bunny-Ears (1.5), Blue-Terror (CAD).
Featherweights:
CSB 1 (retired) CSB 2 (under construction).
Team Coolspeedbot
Antweights:
Killer-Wolf (2.0), Bunny-Ears (1.5), Blue-Terror (CAD).
Featherweights:
CSB 1 (retired) CSB 2 (under construction).
- peterwaller
- Posts: 3213
- Joined: Fri Feb 15, 2002 12:00 am
- Location: Aylesbury Bucks
- Contact:
Re: Team Coolspeedbot's robot builds
That's a good looking arena
- coolspeedbot
- Posts: 260
- Joined: Sun Jul 26, 2015 4:24 pm
- Location: Dover, Kent
- Contact:
Re: Team Coolspeedbot's robot builds
Thanks, I used the dimensions you posted on another thread on the forum.
James Booth
Team Coolspeedbot
Antweights:
Killer-Wolf (2.0), Bunny-Ears (1.5), Blue-Terror (CAD).
Featherweights:
CSB 1 (retired) CSB 2 (under construction).
Team Coolspeedbot
Antweights:
Killer-Wolf (2.0), Bunny-Ears (1.5), Blue-Terror (CAD).
Featherweights:
CSB 1 (retired) CSB 2 (under construction).
- coolspeedbot
- Posts: 260
- Joined: Sun Jul 26, 2015 4:24 pm
- Location: Dover, Kent
- Contact:
Re: Team Coolspeedbot's robot builds
Added more to the concept/ design/ model.
Might have gone overboard with it a little.
Might have gone overboard with it a little.
James Booth
Team Coolspeedbot
Antweights:
Killer-Wolf (2.0), Bunny-Ears (1.5), Blue-Terror (CAD).
Featherweights:
CSB 1 (retired) CSB 2 (under construction).
Team Coolspeedbot
Antweights:
Killer-Wolf (2.0), Bunny-Ears (1.5), Blue-Terror (CAD).
Featherweights:
CSB 1 (retired) CSB 2 (under construction).