Antweight robot max 1,5 cm height

All things antweight

Moderators: BeligerAnt, petec, administrator

Roboteernat
Posts: 109
Joined: Fri Oct 05, 2012 12:37 am
Location: Eastleigh, nr Southampton
Contact:

Re: Antweight robot max 1,5 cm height

Post by Roboteernat »

earthwormjim wrote:
Roboteernat wrote:Im currently building a 1.6mm high robot
Now thats impressive! :D
Yeah, nano bot technology! Lol slip of the finger and brain there me thinks, not I mean cm, 1.6mm lol

The flipper is looking good in my mock up, will post pic soon

Thanks for the specs OP, could be suitable, but would need to be tracked.

I'm thinking I could do this, and machine a custom chassis from all on my cnc mill (blatant plug for any other people needing that service!) again, is this for a coursework assignment, and are you located in the UK? Assuming so as majority of antweight competitors community are...
Thanks
Last edited by Roboteernat on Fri Sep 18, 2015 10:32 am, edited 1 time in total.
Some projects done: Wirelessly controlled mechanical hand/arm
Heavyweight: Short Circuit
Antweight robot : Locking wheel nuts, dell-apidated bANTtry...
Featherweight : Wanna Choppa, CASPer
Check out http://www.Roboteernat.co.uk for more details
glant
Posts: 17
Joined: Tue Sep 01, 2015 1:17 pm

Re: Antweight robot max 1,5 cm height

Post by glant »

Roboteernat wrote:... and are you located in the UK? Assuming so as majority of antweight competitors community are...
I'm in Italy, the nano bot is for building inspection.
Roboteernat
Posts: 109
Joined: Fri Oct 05, 2012 12:37 am
Location: Eastleigh, nr Southampton
Contact:

Re: Antweight robot max 1,5 cm height

Post by Roboteernat »

What is your time scale for completed item, or when you need the completed part for?
Some projects done: Wirelessly controlled mechanical hand/arm
Heavyweight: Short Circuit
Antweight robot : Locking wheel nuts, dell-apidated bANTtry...
Featherweight : Wanna Choppa, CASPer
Check out http://www.Roboteernat.co.uk for more details
glant
Posts: 17
Joined: Tue Sep 01, 2015 1:17 pm

Re: Antweight robot max 1,5 cm height

Post by glant »

Roboteernat wrote:What is your time scale for completed item, or when you need the completed part for?
I have no particular deadline, but if the device can be assembled within one month will be better.
Roboteernat
Posts: 109
Joined: Fri Oct 05, 2012 12:37 am
Location: Eastleigh, nr Southampton
Contact:

Re: Antweight robot max 1,5 cm height

Post by Roboteernat »

I have been looking into the project and have started to make a web page about its build, or should i say proposed build.
Although i am sure several people are discussing potential ideas with the OP and also awaiting a confirmation/funds for actual purchase and build to start, this is my idea for the solution as requested.
Its been interesting, and is along the lines of my LoMo bot i am building - just a bit more rugged and not 150g!

The page is at: http://www.roboteernat.co.uk/low-build-bot/

If you have ideas or to discuss parts, please feel free :)
Some projects done: Wirelessly controlled mechanical hand/arm
Heavyweight: Short Circuit
Antweight robot : Locking wheel nuts, dell-apidated bANTtry...
Featherweight : Wanna Choppa, CASPer
Check out http://www.Roboteernat.co.uk for more details
User avatar
Shakey
Posts: 1119
Joined: Sat Mar 13, 2010 8:38 pm
Location: Reading

Re: Antweight robot max 1,5 cm height

Post by Shakey »

It look quite interesting, not convinced by the use of tracks (At this scale they seem to be a reliability issue for not much gain over 4WD).
Nuts And Bots - For all your components and ready built antweights!

Alex Shakespeare - Team Shakey / Nuts And Bots / Team Nuts:
AWS 44, 45, 49, 51 & 55 Winner - Far too many robots!
Post Reply