Dan want to build spinny spinny smashy smashy thing!

[peterwaller]

Most brushless motor shafts are difficult to remove and there is a real danger of bending it.
If you could post pictures or links to the motor, mount and disc we would be better able to advise.
I normally mount the disc around the outside of the motor body assuming it is an outrunner.

[Hogi]

here are some pictures of the spinner components.

[Shakey]

Your best bet is to print an adapter to hold the disc on the motor if it's like that.

[Hogi]

could you print one for me? if so, how much would you want for it?

[Shakey]

It's something I'd need to have the disc and motor with me for as I like to make the adapter so it hooks into the motor not just the bolts, makes it a bit tougher.

[Hogi]

ok. could we send it to you?

[Hogi]

a bit of an update on the spinner project. i couldn't remove the motor shaft in order to insert the metal mount i had so i sent it to Alex to get a mount 3D printed. i just need to secure the verticle motor mount to improve it's rigidity, make a lid for it, add a wedge scoop for the front and wire in the switch.

[Hogi]

the spinner arrived back from Alex today. i've been busy with it since i got home from school and i've made a 4mm thick HDPE verticle brushless mount. just need to cut a lid, make a scoop and attach the switch before saturday.

[Occashokka]

Wow tight schedule!

[Rapidrory]

Eh, doable; I threw Why Wait? together from scratch in an evening :L