Lemon RX pinout

[limpet]

I`ve just received a Lemon RX without pins, soldering it isn`t a problem but it would help and save a lot fo time if I knew which end to work from and which to use the bind plug.
Thanks
John

[Rapidrory]

If you look on the back, everything's labeled; signals and bind are on the inside row, +ve is the middle row, and gnd is the row closest to the edge

[Shakey]

The square pads in the row marked BI are the bind plugs. The two outer ones. Everything else is marked on it, it doesn't matter which side you solder to.

[limpet]

Ha! couldn`t see that and even with my glasses I still can`t read it. (I`m supposed to have got new ones last year)
Thanks I should be able to sort it now.

[BeligerAnt]

Get an illuminated magnifier John. Best thing I bought for my workbench Good lighting makes so much difference! Even if you think you have good lighting an illuminated magnifier gives you light right where you need it and no shadows.

[Remote-Controlled Dave]

Old men

[limpet]

No country for old men

[peterwaller]

Personally I don't see any problem with old age.
Mainly due to my eyesight not being what it once was.
Here are a few of my attempts to keep on top of things.

In all honesty this one one of several reasons I decided it was time to retire from controller building for others.