I`ve just received a Lemon RX without pins, soldering it isn`t a problem but it would help and save a lot fo time if I knew which end to work from and which to use the bind plug.
Thanks
John
Lemon RX pinout
Moderators: BeligerAnt, petec, administrator
Lemon RX pinout
–-----------------------------
For AntFreeze
https://www.facebook.com/AntFreeze/
For my robots etc.
https://www.facebook.com/13Robotics
Ants, Fleas, Beetles, Feathers & Heavies
For AntFreeze
https://www.facebook.com/AntFreeze/
For my robots etc.
https://www.facebook.com/13Robotics
Ants, Fleas, Beetles, Feathers & Heavies
Re: Lemon RX pinout
If you look on the back, everything's labeled; signals and bind are on the inside row, +ve is the middle row, and gnd is the row closest to the edge
Rory Mangles - Team Nuts
Robots: Nuts 2 and many more...
NanoTwo Motor Controllers: https://nutsandbots.co.uk/product/nanotwodualesc
Robots: Nuts 2 and many more...
NanoTwo Motor Controllers: https://nutsandbots.co.uk/product/nanotwodualesc
Re: Lemon RX pinout
The square pads in the row marked BI are the bind plugs. The two outer ones. Everything else is marked on it, it doesn't matter which side you solder to.
Nuts And Bots - For all your components and ready built antweights!
Alex Shakespeare - Team Shakey / Nuts And Bots / Team Nuts:
AWS 44, 45, 49, 51 & 55 Winner - Far too many robots!
Alex Shakespeare - Team Shakey / Nuts And Bots / Team Nuts:
AWS 44, 45, 49, 51 & 55 Winner - Far too many robots!
Re: Lemon RX pinout
Ha! couldn`t see that and even with my glasses I still can`t read it. (I`m supposed to have got new ones last year)
Thanks I should be able to sort it now.
Thanks I should be able to sort it now.
–-----------------------------
For AntFreeze
https://www.facebook.com/AntFreeze/
For my robots etc.
https://www.facebook.com/13Robotics
Ants, Fleas, Beetles, Feathers & Heavies
For AntFreeze
https://www.facebook.com/AntFreeze/
For my robots etc.
https://www.facebook.com/13Robotics
Ants, Fleas, Beetles, Feathers & Heavies
- BeligerAnt
- Posts: 1872
- Joined: Wed May 15, 2002 12:00 am
- Location: Brighton
- Contact:
Re: Lemon RX pinout
Get an illuminated magnifier John. Best thing I bought for my workbench Good lighting makes so much difference! Even if you think you have good lighting an illuminated magnifier gives you light right where you need it and no shadows.
Gary, Team BeligerAnt
-
- Posts: 3716
- Joined: Sun Apr 03, 2005 5:30 pm
- Location: Antrim, Northern Ireland
- Contact:
Re: Lemon RX pinout
No country for old men
–-----------------------------
For AntFreeze
https://www.facebook.com/AntFreeze/
For my robots etc.
https://www.facebook.com/13Robotics
Ants, Fleas, Beetles, Feathers & Heavies
For AntFreeze
https://www.facebook.com/AntFreeze/
For my robots etc.
https://www.facebook.com/13Robotics
Ants, Fleas, Beetles, Feathers & Heavies
- peterwaller
- Posts: 3213
- Joined: Fri Feb 15, 2002 12:00 am
- Location: Aylesbury Bucks
- Contact:
Re: Lemon RX pinout
Personally I don't see any problem with old age.
Mainly due to my eyesight not being what it once was.
Here are a few of my attempts to keep on top of things.
In all honesty this one one of several reasons I decided it was time to retire from controller building for others.
Mainly due to my eyesight not being what it once was.
Here are a few of my attempts to keep on top of things.
In all honesty this one one of several reasons I decided it was time to retire from controller building for others.