SG90 Speed Hacking
Moderators: BeligerAnt, petec, administrator
- joey_picus
- Posts: 1137
- Joined: Tue Jan 13, 2009 1:51 pm
- Location: Lancaster, Lancashire
- Contact:
Re: SG90 Speed Hacking
Araldite or similar epoxy should do it, maybe with some coarse sandpaper or similar to rough up the gear faces for a better bond.
Joey McConnell-Farber - Team Picus Telerobotics - http://picus.org.uk/ - @joey_picus
"These dreams go on when I close my eyes...every second of the night, I live another life"
"These dreams go on when I close my eyes...every second of the night, I live another life"
-
- Posts: 30
- Joined: Mon Aug 29, 2016 11:57 am
Re: SG90 Speed Hacking
Thanks, I will give that a try!
- BeligerAnt
- Posts: 1872
- Joined: Wed May 15, 2002 12:00 am
- Location: Brighton
- Contact:
Re: SG90 Speed Hacking
Most glues will struggle with nylon. Epoxy is perhaps the best bet (apart from some esoteric solutions). If you can put a pin through the gears it will help enormously. Failing that, if you can drill some (very) small holes in the gears it will really help the epoxy to hold everything together.
Gary, Team BeligerAnt