deodorANT & friends

[Team Nuclear]

what size and what thickness do you want?

[Team Nuclear]

are you using it for a feather or ant?

[haz]

hmm, how big are you prepaired to go preferably 6mm and 2mm if you could find it in your heart to sell us a bit of 15mm as well it would be much apreciated, its for an ant btw and maybe a beetle

[Team Nuclear]

let me think....
I've got the old bulkheads of lazer which is 80mm high strips of 15mm
I've also got the old lid of laser (6mm)which has got a few holes in it (roughly 450mmx400mm)
Ive also got a massive 1000x500mm of 2mm which I could cut a bit for you
First tell me what you want, then I'll check with my dad if I could sell some to you.

[Craig_Anto3]

any big one but you wont be able to run 7.4 through it

not true, we used to run s3003 futaba servos on 9.6v
I have a block of 25mm HDPE you can have at the AWS if you can wait till then

[haz]

ive blown loads of standard size servos on 7.4v what did you do to them?
oooh what kind? black or white and how big/ much?

[haz]

a friend of deodorANT: oponANT!

http://s947.photobucket.com/albums/ad31 ... atpenguin/
first 6 photos

[haz]

check me out

[joey_picus]

Looks great Harry! Do you have the length to put any acetate or other stuff on the front?

[haz]

yep, its 4" square so plenty of room, the ti scoop was ment to be bent at the bottom but since its grade 5 its a real b*gger to bend. the old scoop i made took about an hour of hammering its bang on 150g so i am trying to lose a few grams, any thoughts??