RobotWars101

Due to every waking moment being spent on the vertical spinner that is basically from scratch in a rush for bath, the horn or selfrighting has been ignored and I'm going to run on the floorless basis that if I get flipped I'm sorta losing anyway

I cut the red wire and rebound, it still moved on bottom throttle no matter what so I put the trims up, bound then after binding knocked it down and recharged the battery and it all works now so thanks lots

I hadn't cut any, so only having 5v was hopefully why the motor rated for like 11v+ wasn't working, I will check tomorrow morning

No beeps :( I have just realized it had a 5v beac on the Afro but the red wire on the servo plug is the middle one and I thought it was a side one you cut, it's the type that goes brown,red, yellow. Blade mounting wise my blade/hunk of aluminium hasn't arrived yet but I intend to attach it between t...

I've just wired my new spinner up using an afro12A and a red DYS motor, the normal stuff binds fine but the spinner won't work, when I push in the weapons stick the Afro flashes orange then remains green until I release where it goes red then off, the spinner still sitting there not moving, I really...

Mine was more than £5 mine was probably a more complex shape and only 1 tho, The file format I used was .Dxf which I won't pretend to know anything about seen as I didn't design my file.

Seen as this is quite a close one When I have 3 robots I will sign up

Im nearly there for parts now but i made the stupid mistake of getting a 1s lipo i can't charge, so i need a cheap chinese 1s charger that will do the job with minimum expense, so i wanted to check if this works: http://www.ebay.co.uk/itm/3-7v-600mah-25c-Lipo-Battery-4pcs-Charger-for-Syma-X5-X5c-Par...

Yay more cool cheap parts from fake amazon... sorry i mean banggood.com which totally isnt chinese amazon lol

Unfortunately the reason there aren't many is that they are very hard to make effective, most current axes use brushed gearmotors. You say a roughly 10cm hammer arm, Isn't that going to be rather tight in the cube limit?